FEco TiO₂ - Colfeed4Print
search
  • FEco TiO₂ - Colfeed4Print
Compare
You must be logged in to manage your wishlist.

FEco TiO₂ - Colfeed4Print

COLFEED-FECO-TIO2-175-10M
175.00 € 175.00 €
Tax excl.
Diameter
Format
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September
Available

The FEco TiO₂ filament is a material with a PLA matrix and 15 % (volume) of titanium dioxide nanoparticles. The TiO₂ particles have a large specific surface area (52.3 m2/g) and high content of anatase phase (anatase:rutile 80:20). The 15 % of TiO₂ in this filament gives it a kinetics constant of 6.57 10 -2 h -1 (3 ppm NM pH2).

A cross-section of the FEco TiO₂ filament

Image 1: A cross-section of the FEco TiO₂ filament. Source: Colfeed4Print.

FEco TiO₂ belongs to the FEco family of materials by Colfeed4Print which includes various photo- and electroactive materials for the 3D printing of multidirectional and customized interconnected structures with specific photo- and electrochemical activity.

Filters 3D printed with the FEco TiO₂ filament

Image 2: Filters 3D printed with the FEco TiO₂ filament. Source: Colfeed4Print.

The FEco TiO₂ filament itself is suitable for use as an effective filter in many catalytic and photocatalytic applications. The TiO₂ nanoparticles have a size of 90 nm and are homogeneously dispersed in the PLA base thanks to the colloidal approach used to prepare the feedstock.

Filters 3D printed with the FEco TiO₂ filament

Image 3: Filters 3D printed with the FEco TiO₂ filament. Source: Colfeed4Print.

The FEco TiO₂ filament is easily printable via the FFF 3D printing technology as it doesn't cause any clogging issues. To avoid potential warping and adhesion issues, Colfeed4Print recommends the use of 1 or 2 skirts around the part.

General information
Material PLA
Format 10 m
Density 1.6 g/cm³
Filament diameter 1.75 mm
Filament tolerance ±0.15 mm
Filament length 10 m

Printing properties
Printing temperature 160 - 170 ºC
Print bed temperature 30 - 60 ºC
Chamber temperature -
Cooling fan -
Recommended printing speed 20 - 50 mm/s

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Melting temperature 155 ºC
Softening temperature - ºC

Other
HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

The FEco TiO₂ filament is delivered in a vacuum sealed bag with desiccant. Once opened, the filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. It is recommended to dry the filament before printing at 40-60°C for 2 minutes.

The manufacturer recommends printing FEco TiO₂ filament at 160-170 ºC on a bed heated to 30-60 ºC at a speed of 20-50 mm/s. The use of 1 or 2 skirts around the part (equal to the printing speed) will improve the adhesion of the part to the print bed. More printing tips can be found in the User Guide document in the Downloads section.

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the FEco TiO₂ filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.

Featured properties

Printing temperature
160 - 170 ºC
Filament diameter
1.75 mm
Density
1,6 g/cm³

Related products