Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

FEco Carbon - Colfeed4Print

Ref.: COLFEED-FECO-CARBON-175-10M

165.00 €

Tax excl.

Diameter

Format

Quantity

Do you need more than 1 units?
Please, contact us.

In stock 1 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November

Available

Returns

Ask about this product

The FEco family of materials by Colfeed4Print includes various photo- and electroactive materials for the 3D printing of multidirectional and customized interconnected structures with specific photo- and electrochemical activity. One of the materials in that group is the FEco Carbon filament with 25 % (volume) of graphite particles in a PLA matrix.

Parts 3D printed with the FEco Carbon filament

Image 1: Parts 3D printed with the FEco Carbon filament. Source: Colfeed4Print.

The FEco Carbon filament has a conductivity of 13 S m^-1 and can be used for the additive manufacturing of conductive 3D patterns, photoactive filters, or electrodes for energy generation and storage devices. The graphite particles have a size of 23 µm and are highly dispersed in the PLA base thanks to the colloidal approach used to prepare the feedstock.

A cross-section of the FEco Carbon filament

Image 2: A cross-section of the FEco Carbon filament. Source: Colfeed4Print.

The FEco Carbon filament is easily printable via the FFF 3D printing technology as it doesn't cause any clogging issues. Nevertheless, Colfeed4Print recommends the use of a 3D printer with a two-gears extruder for a better grip of the filament and prevention of undesirable filament breakage, as well as the use a low-grip bed to facilitate part removal.

General information
Material	PLA
Format	10 m
Density	1.49 g/cm³
Filament diameter	1.75 mm
Filament tolerance	±0.15 mm
Filament length	10 m

Printing properties
Printing temperature	200 ºC
Print bed temperature	50 - 60 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	10 - 60 mm/s

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Melting temperature	154 ºC
Softening temperature	55 ºC

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

The FEco Carbon filament is delivered in a vacuum sealed bag with desiccant. Once opened, the filament should be stored properly to prevent it from absorbing moisture from the air. The best way to store filaments in a tightly sealed bag with desiccant, in a vacuum sealed container or in an intelligent filament container. It is recommended to dry the filament before printing at 40-60°C for 2 minutes.

The manufacturer recommends printing FEco Carbon filament at 155-165 ºC on a bed heated to 50-60 ºC at a speed of 10-60 mm/s. The use of 1 or 2 skirts around the part (equal to the printing speed) will improve the adhesion of the part to the print bed. More printing tips can be found in the User Guide document in the Downloads section.

It is highly recommended to wear standard safety equipment during the printing and post-processing of parts 3D printed with the FEco Carbon filament - safety goggles, gloves, breathing equipment and protective garments, according to needs.