This product could be delivered in a period exceeding the standard.

New product

187,00 €
187,00 €

Ask for information

Water-soluble and water-activated support filaments.

Zortrax is a Polish company founded in 2013 and focused on the development of professional 3D printing systems. Its main strength is the excellent optimisation and integration between its 3D printers, materials and software. This greatly simplifies the entire printing process, minimising set-up times and reducing the likelihood of failure to a minimum, making them ideal systems for professional environments.

Zortrax offers a wide range of technical materials perfectly optimised for best results in conjunction with its LPD printers, including ABS, ASA, PCABS, Nylon, HIPS and others.

Z-SUPPORT is the family of soluble support materials compatible with Zortrax materials. It is composed of two materials:


Z-SUPPORT Premium is a water soluble support filament. It is a butanediol vinyl alcohol copolymer (BVOH) based material that provides fast dissolution, superior to that provided by PVA.

Z-SUPPORT Premium can work in a wide temperature range, which gives it high compatibility, being compatible with Z-GLASS, Z-PETG, Z-PLA, Z-PLA Pro and Z-ULTRAT Plus.


Z-SUPPORT ATP is a support filament designed to provide good stability at high temperatures. Unlike Z-SUPPORT Premium, it is not directly soluble in water, but it is necessary to dissolve ATP Activator in water beforehand to create a slightly basic solution.

Z-SUPPORT ATP is an efficient alternative to HIPS as a support material. As it does not require organic solvents, waste generation is much lower and treatment is simpler.

It also has a high compatibility. Can be used with Z-ABS, Z-ASA Pro, Z-ESD, Z-ULTRAT and Z-ULTRAT Plus.

Z-SUPPORT filaments allow complex shapes to be made with virtually any Zortrax filament.

Solubility Solubility
General information
Manufacturer Zortrax

Z-SUPPORT PREMIUM - 800g spool
Z-SUPPORT ATP - 750g spool

Density -
Diameter of filament 1.75 
Diameter tolerance -
Filament length -
Color Natural
RAL/Pantone -
Print settings
Printing temperature -
Print bed temperature -
Chamber temperature -
Cooling fan -
Recommended printing speed -
Mechanical properties
Impact resistance (indented) -
Impact resistance (non-indented) -
Elongation at break (ISO 527) -
Tensile strength (ISO 527) -
Tensile Modulus -
Flexural strength (ISO 178) -
Flexural modulus (ISO 178) -
Surface hardness (ISO 2039) -
Thermal properties
Softening temperature (ISO 306) -
Melting temperature -
Specific properties
Transparency  -
Inflammability (UL94) -
Additional Information
HS Code 3916.9
Diameter spool (outer) -
Diameter spool (inner hole) -
Spool Width -

* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.


30 other products in the same category: