Aqua 8K resin Phrozen

Phrozen

New product

38 Items

57,80 €
57,80 €

Ask for information

Modelling resin for the 3D printing of high-quality extremely intricate models in 8K.

Phrozen's Aqua 8K resin is a material specifically formulated to display fine details in full 8K resolution. Aqua 8K comes in Gray, Snow-Gray, Vanilla and Red Clay and works best with Phrozen's 8K 3D printers, such as the Sonic Mini 8KSonic Mighty 8K or Sonic Mega 8K. Models 3D printed with this resin are characterised by their high quality and extremely intricate detail.

Models 3D printed with Aqua 8K resin

Image 1: Models 3D printed with Aqua 8K resin. Source: Phrozen.

Like all Phrozen resins, Aqua 8K resins are low-viscosity, low-odour resins with very low shrinkage/strain and high dimensional stability. This makes Aqua 8K resins easy to print and post-process, ideal for 3D printing of models but also for industrial parts.

Elongation at break (%) 8
Tensile strength (MPa) 43
Tensile modulus (MPa) 1730
Surface hardness 9

Once opened, Phrozen Aqua 8K resin must be stored properly to prevent degradation of the resin. To achieve the desired properties, parts 3D printed with Aqua 8K resin must be post-processed. The parts must first be washed in IPA alcohol or any other authorized resin cleaning liquid and then post-cured under UV light. Washing and curing can be done with the help of devices such as the Phrozen Cure & Wash Kit or the Cure XL or Cure Mega curing devices.

More information on the maintenance of Phrozen resins and post-processing of 3D printed parts can be found in the Manual in the Downloads section.

General information
Manufacturer Phrozen
Technology  LCD
Material Photopolymer
Wavelength 405 nm
Format 1 kg
5 kg
Color Snow-Gray
Gray
Vanilla
Red Clay
Compatible 3D printers LCD
Printing properties
Layer height -
Layer exposure time -
Layer cooling time -
Lifting height -
Exposure of bottom layers -
Number of bottom layers -
Curing and washing properties
Washing time -
Curing time -
Curing temperature -
Mechanical properties
Izod impact resistance (ASTM D256) 10 J/m (notched)
Charpy impact resistance -
Elongation at break (ASTM D638) 8 %
Tensile strength (ASTM D638) 43 MPa
Tensile modulus (ASTM D638) 1730 MPa
Flexural strength -
Flexural modulus -
Surface hardness (ASTM 2240) Shore 82 D
Thermal properties
Thermal deflection temperature (ASTM D648) (@ 0.45 MPa) 77 ºC
Softening temperature -
Brightness value -
Additional information
Service life -
HS Code 2916.1


* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

Accessories

30 other products in the same category: