Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
The PA12 Industrial 3D printing powder by Sinterit is a nylon 12, one of the various varieties of nylon. PA12 is composed of ω-aminolauric acid or laurolactam monomers that each have 12 carbons, giving it the name nylon 12. Nylon 12 is used in many industrial sectors (from textiles to aeronautics) and it is know for its hardness, resistance to abrasion, low water absorption and low density, as well as chemical resistance and low risk of stress cracking.
Apart from those properties, the PA12 Industrial powder makes for accurate and dimensionally stable 3D prints with excellent mechanical properties (especially tensile strength) and a great industrial surface finish.
PA12 Industrial was designed to be used on the Lisa X and Nils 480 SLS 3D printers, and it is ideal for applications such as functional prototyping and the 3D printing of jigs and fixtures, as well as the fabrication of end use parts. Parts 3D printed with the PA12 Industrial powder will be ideal not only for visually attractive prototypes but also for prolonged use under stress in chemically demanding environments.
The PA12 Industrial powder by Sinterit is also biocompatible (tested for non irritant and non cytotoxicity). However, it should be kept in mind that the biocompatibility largely depends on the proper 3D printing and post-processing of the part, and it is the manufacturer's responsibility to confirm biocompatibility for the final use.
Elongation at break (%) | 7.8 |
Tensile strength (MPa) | 52 |
Tensile modulus (MPa) | 1840 |
Flexural strength (MPa) | 60.6 |
Flexural modulus (MPa) | 1380 |
Surface hardness | 8 |
Chemical resistance | Chemical resistance |
It is highly recommended to use personal protection equipment (face protection, goggles, gloves, protective clothing and breathing equipment) when handling the PA12 Industrial powder.
The recommended refreshing ratio for the PA12 Industrial Powder is 30 % of PA12 Industrial powder and 70 % of recycled powder. The amount of needed fresh powder is automatically calculated by the Sinterit software and shown on the printer screen after the print job is finished.
General information | |
---|---|
Manufacturer | Sinterit |
Technology | SLS |
Material | Nylon-12 |
Format | 6 kg |
Granulation | 62 µm |
Material refreshing ratio | 30 % |
Color | Matte grey |
Compatible 3D printers | Lisa X, Nils 480 |
Mechanical properties | |
Tensile strength (PN-EN ISO 527-2:2012) | 52.3 MPa |
Tensile Modulus (PN-EN ISO 527-2:2012) | 1840 MPa |
Elongation at break (PN-EN ISO 527-2:2012) | 7.8 % |
Flexural strength (PN-EN ISO 178-2019) | 60.6 MPa |
Flexural modulus (PN-EN ISO 178-2019) | 1380 MPa |
Charpy impact strength (PN-EN ISO 179- 1/1eU:2010) | 29.5 KJ/m2 |
Surface hardness (PN- EN ISO 868:2005) | Shore 75D |
Thermal properties | |
Softening temperature (Vicat A50 / B50) | - |
Melting point (PN-EN ISO 11357-3:2018) | 184.4 ºC |
Heat deflection temperature B | - |
Surface roughness | |
Mean roughness (Ra) in XZ/YZ planes | - |
Mean roughness (Ra) in XY plane | - |
Mean roughness depth (Rz) in XZ/YZ planes | - |
Mean roughness depth (Rz) in XY plane | - |
Aditional information | |
HS Code | 3908.1 |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
260,00 €
280,00 €
900,00 €
900,00 €
340,00 €
500,00 €
440,00 €
380,00 €
320,00 €
900,00 €
35,00 €
730,00 €
780,00 €
129,95 €
139,95 €
164,95 €
1 030,00 €
1 030,00 €
780,00 €
1 320,00 €
534,00 €