1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Nylon-Carbon Fiber Filament (CF15) View larger

    Nylon-Carbon Fiber Filament (CF15)

    Fillamentum

    New product

    29 Items

    45,95 €tax excl.
    55,60 €tax incl.

    Ask for information

    Strong and durable material, ideal for making parts that require stress.

    Nylon-Carbon Fiber (CF15) filament is an incredibly stronger, durable material and is ideal for making parts that require stress (eg bearings).

    Another feature of the Nylon-Carbon Fiber (CF15) filament is that it has a high thermal and chemical resistance with a high processing stability and good rheological properties. On the other hand the Nylon-Carbon Fiber (CF15) has excellent impact resistance with low temperatures as well as a low thermal expansion. (Unlike other filaments that are less than 20 ° C in temperature, they become brittle).

    The carbon fiber added to the nylon allows to achieve a greater resistance to the impact of the pieces printed with the filament CF15.

    The majority of nylon filaments in the 3D printing market have a high absorption of environmental humidity so they end up causing print defects. However, the nylon-carbon fiber filament (CF15) has much lower moisture absorption than standard nylon.

    With the addition of carbon fiber to the nylon base it is possible to obtain a better adhesion to the base with which it has very little warping and in addition a greater hardness is obtained surpassing all the nylons of the market.

    Apart from all these mechanical properties, it is worth noting the carbon black finish of the CF15 filament, which makes it attractive even for architectural and design applications.

    It is advisable to use a hardened steel nozzle or Olsson Ruby since the carbon fiber is quite abrasive and wears the brass nozzles.

    Nylon-FC Fillamentum

    Although the Nylon-Carbon Fiber (CF15) filament is one of the nylon filaments with less warping effect, it is recommended to use the DimaFix high-performance intelligent lacquer in order to ensure adherence to the hot bed and thus reduce Warping effect.

    In case of warping effect the use of Raft is recommended to eliminate possible contractions in the printing of the part. It is also advisable to program the Brim, although effect will be lower and there could be a minimum occurrence of warping in the base depending on the geometry of the piece.

    Because of the carbon fiber loads worn by brass extruders it is advisable to use hardened steel nozzles and it is also advisable to use cleaning filaments at the end of printing with this filament.

    General information
    ManufacturerFillamentum (Czech Republic)
    MaterialNylon + Carbon Fiber (15%)
    FormatSpool of 0.60 kg
    Density1.08 g/cm3
    Diameter of filament 1.75 or 2.85 mm
    Diameter tolerance ±0,10 mm
    Filament length ±231 m (Ø 1.75 mm-0.60Kg)
    ±87 m (Ø 2.85 mm-0.60Kg)
    ColorMatt black
    RAL/Pantone-
    Print settings
    Printing temperature 235-260ºC
    Print bed temperature 80-100ºC
    Chamber temperature Not necessary (recommended)
    Cooling fan Not recommended
    Recommended printing speed 20-30 mm/s
    Mechanical properties
    Izod impact strength-
    Charpy impact strength (ISO 179)86.2 KJ/m2
    Elongation at break (ISO 527)103% 
    Tensile strength (ISO 527)54.5 MPa 
    Tensile Modulus (ASTM 527)500 MPa 
    Flexural strength-
    Flexural modulus-
    Surface hardness (ISO 7619)Shore 75D
    Thermal properties
    Softening temperature -
    Melting temperature 160ºC
    Specific properties
    Transparency -
    Additional Information
    HS Code3916.9
    Diameter coil (outer) 200 mm
    Diameter coil (inner hole) 55 mm
    Coil Width 50 mm


    * The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

    11 other products in the same category: