On Monday, January 6th, we will remain closed due to a holiday. Orders received from Friday, January 3rd at 5:00 PM (GMT+1) will be shipped on Tuesday, January 7th. |
Filamet™ 316L stainless steel from The Virtual Foundry (TVF) is an innovative filament composed of more than 80 % metal and the rest by PLA. The Virtual Foundry is an American company formed by great experts in the sector of molten metal, which have been constantly working since 2014 to improve and grow its range of filaments and accessories for 3D FDM metal printing. Its products are oriented to solve and simplify problems through innovative metallic materials for 3D FDM printers of any kind.
Image 1: Gear made of 316L stainless steel without sintering. Source: The Virtual Foundry
316L Stainless Steel is a chrome nickel molybdenum, austenitic stainless steel with low carbon content. It is antimagnetic in its annealed state and its hardening by heat treatment is not possible, but nevertheless it has good forming properties, gaining resistance by deformation. This has the disadvantage of needing greater efforts to deform it. Its good ductility, tensile strength, thermal resistance and corrosion resistance even at high temperatures, make 316L stainless steel used in countless industrial applications: Aeronautical Industry as standard material, sectors that need metals resistant to the effects of salts and acids (Paper, Textile or Chemical) or Pharmaceutical Industry to prevent metal contamination.
The Virtual Foundry has been the pioneer in developing metallic filaments for 3D printing after many years of research and development. The great competitive advantage developed is that to obtain the pure metal parts it is only necessary to print the piece and sinter it in an oven. Other manufacturers that have tried to develop metallic filaments need to do one more process (prior to sintering in the furnace) which is the debinding that consists of a chemical process to separate the binder polymers from the metal. Therefore, it can be concluded that The Virtual Foundry is the pioneer and the benchmark in 3D metal FDM printing, obtaining a fairly simple process with results never seen so far in the world of metal fabrication.
Currently, a large list of industry sectors are using The Virtual Foundry filaments: 3D printer manufacturers, biomedical innovation, jet engine development, radiation shielding, space exploration, nuclear energy, dental, artists or fashion design. A remarkable application is the manufacture of a drill with internal hot water heating, for drilling in the Antarctic. With the Filamet™ copper it has been manufactured, very easily and at a low cost, a drill with an internal structure extremely difficult to machine or mold has been manufactured very easily and at a low cost. Another notable application is the printing of containers for radiation shielding with tungsten Filamet™. These types of containers are used to transport reactive medicines without having to resort to lead containers (toxic). Thanks to the density of tungsten, 1.6 higher than lead, this filament is ideal for creating any type of replacement part made from lead.
Filamet™ 316L stainless steel is a filament formed by base metal and a biodegradable and ecological polymer (PLA). This material is free of exposed metal particles and volatile solvents that can be released during printing. Formed by more than 80% 316L stainless steel and the rest by PLA, this material is extremely simple to print, since its printing properties are similar to those of the PLA, which allows any user of a FDM 3D printer create parts with this filament, without the need to buy expensive industrial 3D FDM metal printers. With Filamet™ 316L properties similar to those possible with DMLS technology are achieved but with certain limitations. Due to the need to sinter the printed pieces with this filament, where the PLA is removed, the pieces have porosity, loss of volume and non-isotropy. DMLS 3D printers manage to print totally solid parts (similar to the foundry), in great detail, layer heights of 0.02 mm and without the need for post-processing, the only disadvantage compared to Filamet™ 3D FDM printing the cost of: material, manufacturing and the printers themselves.
Image 2: Model manufactured with Filamet™ 316L stainless steel and sintered. Source: The Virtual Foundry
Due to its large metal content (more than 80 %), it is necessary to place the filament inlet as aligned as possible with the extruder and use FilaWarmer, a heater through which the filament is introduced to eliminate its curvature and that way the least possible friction occurs in the extruder and HotEnd. Once a piece is printed, it is necessary to carry out the sintering process, in an open environment or in a vacuum or inert environment, to eliminate the polymer (PLA), taking into account that sintering values must be adjusted depending on the geometry and oven model. The product that is obtained is totally metallic, with the real properties of the metal as electrical conductivity, post-processed by sanding and polishing or even welding union; but with a certain porosity and a reduction in volume due to the loss of PLA. To know more about the whole process of printing, sintering and post-processing you should visit the "Tips for Use" section.
Users who do not have an kiln with the necessary properties to sinter the printed parts with the Filamet™ 316L stainless steel and get the final properties of this metal, can contact us and we will assess its viability through our collaborators with ability to perform the post-processing necessary to obtain the desired final result.
General information |
|
Manufacturer | The Virtual Foundry |
Material | Metal + binder |
Format | 500 g |
Density | 3.5 g/cm³ |
Filament diameter | 1.75 / 2.85 mm |
Filament length | (Ø 1.75 mm - 0.5 kg) ± 57 m / (Ø 2.85 mm - 0.5 kg) ± 22 m |
Amount of filler (volume) | 66 % |
Amount of filler (mass) | 82 % |
Mechanical properties |
|
Elongation at break | - % |
Tensile strength | - MPa |
Tensile modulus | - MPa |
Flexural strength | - MPa |
Flexural modulus | - MPa |
Surface hardness | - |
Printing properties |
|
Printing temperature | 205 - 215 ºC |
Print bed temperature | 50 ºC |
Recommended printing speed | 30 mm/s |
Recommended nozzle | Stainless steel |
Recommended nozzle diameter | Min. 0.6 mm |
Thermal properties |
|
Softening temperature | 55 ºC |
FilaWarmer temperature | 60 ºC |
Sintering properties |
|
Container | Refractory crucible |
Refractory powder | Alumina |
Maximum temperature | 1260 ºC |
Specific properties |
|
Radiation protection (without sintering) | ✗ |
Other |
|
HS Code | 7205.21 |
Spool diameter (outer) | 300 mm |
Spool diameter (inner hole) | 65 mm |
Spool width | 55 mm |
PRINTING TIPS
Due to the high quantity of metal, the filament can be broken more easily than a conventional PLA filament. To avoid breakage during printing, it is recommended to use Filawarmer, an accessory that preheats the filament before printing to reduce its fragility and increase its malleability.
It is necessary to use a hardened nozzle of at least 0.6 mm diameter to avoid jamming.
As far as infill, the average recommended amount is 30-70 % but it largely depends on what kind of part the user wants to obtain and whether the part will be sintered or not. For more indepth information please watch this video:
Video 1: The recommended infill for the TVF materials. Source: TVF.
It is recommended to print on a glass base and use an adhesive such as Magigoo. It is not possible to print directly on PEI bases, as the part could be welded to the base and the base would be damaged. If you have a PEI base, we recommend applying a layer of Blue Tape.
Printing at low speeds of up to 30 mm/s is recommended.
SINTERING PROCESS
Necessary materials:
- Metallurgical furnace
- Refractory crucible
- Refractory powder
- Sinter carbon
STEP 1: Placing the piece
- Fill the crucible with refractory powder leaving 40 mm free on the surface of the crucible.
- Immerse the piece in the refractory powder making sure to leave a gap of at least 15 mm between the surface of the piece and the walls and upper and lower parts of the crucible. The refractory powder must not be compacted.
- Fill the free 40 mm on the surface of the crucible with sinter carbon.
- Place the crucible in the furnace.
STEP 2: Thermal debind
- Heat up to 204 ºC.
- Keep at 204 ºC for 2 hours.
- Heat up to 427 ºC at a speed of 1.86 ºC/min.
- Keep at 427 ºC for 2 hours.
STEP 3: Sintering
- Heat up to 593 ºC at a speed of 1.86 ºC/min.
- Keep at 593 ºC for 2 hours.
- Heat up to 1260 ºC at a speed of 5.5 ºC/min
- Keep at 1260°C for 4 hours*.
STEP 4: Cooling
- Cooling up to 593 ºC at a speed of 0.18 ºC/min
- Allow to cool to room temperature.