No products

To be determined Shipping

0,00 € Tax

0,00 € Total

Check out

Product successfully added to your cart

0 products in the cart 1 product in the cart

Quantity:

Checkout

Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

More information Gestionar cookies

I accept

View larger

Adamant S1 (PVDF)

Reference:

Brand: Addnorth

Condition: New product

8 Item Items

Diameter

Format

Colour

Quantity

155,37 €

Ask for information

PVDF filament with excellent mechanical, chemical and thermal properties.

Add to wishlist

More info
Data sheet
Download
Usage tips
Specifications

Addnorth is a Swedish manufacturer of filaments for 3D printing, renowned for producing very high quality filaments, as well as for the strong development of materials for applications in science and engineering.

Adamant S1 filament is a filament with advanced properties based on PVDF.

PVDF (Polyvinylidene Fluoride) is an advanced plastic (fluoropolymer) with excellent mechanical, chemical and thermal properties. It stands out for being an inert plastic to most chemical compounds (except caustic solutions and ketones), which, together with its high thermal resistance of up to 120ºC in continuous work, makes it a material with great potential in the chemical industry.

Among the properties of PVDF are:

Lower density than other fluoropolymers
Higher mechanical resistance than other fluoropolymers
High continuous operating temperature (140 °C)
Virtually no moisture absorption
Good dimensional stability
High chemical resistance
Good resistance to hydrolysis
UV resistance
Radiation resistance
Good electrical insulation
High abrasion resistance

Addnorth's Adamant S1 filament is made entirely of PVDF and is an industrial grade 3D printing material. Due to its composition, the PVDF filament shares the properties of the base material.

Thus, Addnorth's Adamant S1 filament has good heat resistance and excellent resistance to chemicals and solvents.

This filament can be used in demanding applications and under extreme conditions. Adamant S1 has a flammability rating of UL94 V-0.

The biggest problem with this type of advanced filament is that they often experience a large amount of warping. However, the Adamant S1 filament has been developed in such a way that it is almost deformation free during the 3D printing process. Furthermore, the Adamant S1 filament has a good layer adhesion.

Therefore, despite being an advanced material, it can be printed with almost any desktop printer.

Adamant S1 material properties diagram.

Image 1: Adamant S1 material properties diagram. Source: Addnorth.

Adamant S1 filament is available in white colour and in 1000 g format, both in 1.75 mm and 2.85 mm.

Visual properties of the material.

Image 2: Visual properties of the material. Source: Addnorth.

Some of the most common applications of this material are

Gaskets
Rotation discs
Valves
Sprockets
Connection pieces
Sliding bars

With Adamant S1 it is possible to produce semi-flexible 3D printed parts with an extreme durability. Due to its properties, this material could be considered as the low temperature equivalent of PEEK.

Elongation at break (%)	50
Tensile strength (MPa)	58
Tensile modulus (MPa)	387
Flexural strength (MPa)	120
Flexural modulus (MPa)	3155
Softening temperature (ºC)	135
UV resistance	UV resistance
Chemical resistance	Chemical resistance
Hide color variations	(Hide color variations)

Adamant S1 Datasheet

Download

Adamant S1 must be printed at a temperature between 240°C and 260°C, and with a base temperature between 50 and 60°C.

This filament has been developed in such a way that it has almost no warping. Anyway, it is recommended to use an adhesive such as Magigoo PA to improve the adhesion to the base, especially when printing big pieces.

Due to its high density, the printing speed should not exceed 40 mm/s and accelerations should be limited.

It is recommended to increase the Flow value to 102 - 105 %.

General information
Manufacturer	Addnorth
Material	PVDF
Format	1000 g spool
Density	1.8
Filament diameter	1.75 or 2.85 mm
Diameter tolerance	±0,025 mm
Filament length	±231 m (1.75 mm) ±87 m (2.85 mm)
Color	White
RAL/Pantone	-
Printing properties ⁽¹⁾
Printing temperature	240 - 260 ºC
Base/bed temperature	50 - 60 ºC
Chamber temperature	Not required
Coating Fan	Not Recommended
Print speed	30 mm/s
Nozzle diameter	-
Extrusion multiplier	1.1
Mechanical properties
Izod impact resistance	-
Charpy impact resistance	-
Elongation at break	>50%
Tensile strength	58 MPa
Traction module	387 MPa
Flexural strength	120 MPa
Bending module	3155 MPa
Surface hardness	-
Thermal properties
Softening temperature	135 ºC
Melting temperature	-
Specific properties
Transparency	Opaque
Further information
HS Code	3916.9
Spool diameter (outside)	200 mm
Spool diameter(inner hole)	52 mm
Spool width	55 mm

* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend that you confirm the results and final properties with your own tests. For further information, please refer to the product data sheet.