Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Adamant S1 (PVDF)

Name: Adamant S1 (PVDF)
Brand: Addnorth
SKU: ADDN-ADAMANTS1

Ref.: ADDN-ADAMANTS1-WHITE-175-1000

155.37 €

Tax excl.

Diameter

Format

Colour

Volume discounts

Quantity	Discount	Price
10	10% 10%	139.83 € 139.83 €

Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Returns

Ask about this product

Addnorth is a Swedish manufacturer of filaments for 3D printing, renowned for producing very high quality filaments, as well as for the strong development of materials for applications in science and engineering.

Adamant S1 filament is a filament with advanced properties based on PVDF.

PVDF (Polyvinylidene Fluoride) is an advanced plastic (fluoropolymer) with excellent mechanical, chemical and thermal properties. It stands out for being an inert plastic to most chemical compounds (except caustic solutions and ketones), which, together with its high thermal resistance of up to 120ºC in continuous work, makes it a material with great potential in the chemical industry.

Among the properties of PVDF are:

Lower density than other fluoropolymers
Higher mechanical resistance than other fluoropolymers
High continuous operating temperature (140 °C)
Virtually no moisture absorption
Good dimensional stability
High chemical resistance
Good resistance to hydrolysis
UV resistance
Radiation resistance
Good electrical insulation
High abrasion resistance

Addnorth's Adamant S1 filament is made entirely of PVDF and is an industrial grade 3D printing material. Due to its composition, the PVDF filament shares the properties of the base material.

Thus, Addnorth's Adamant S1 filament has good heat resistance and excellent resistance to chemicals and solvents.

This filament can be used in demanding applications and under extreme conditions. Adamant S1 has a flammability rating of UL94 V-0.

The biggest problem with this type of advanced filament is that they often experience a large amount of warping. However, the Adamant S1 filament has been developed in such a way that it is almost deformation free during the 3D printing process. Furthermore, the Adamant S1 filament has a good layer adhesion.

Therefore, despite being an advanced material, it can be printed with almost any desktop printer.

Adamant S1 material properties diagram.

Image 1: Adamant S1 material properties diagram. Source: Addnorth.

Adamant S1 filament is available in white colour and in 1000 g format, both in 1.75 mm and 2.85 mm.

Visual properties of the material.

Image 2: Visual properties of the material. Source: Addnorth.

Some of the most common applications of this material are

Gaskets
Rotation discs
Valves
Sprockets
Connection pieces
Sliding bars

With Adamant S1 it is possible to produce semi-flexible 3D printed parts with an extreme durability. Due to its properties, this material could be considered as the low temperature equivalent of PEEK.

General information
Material	PVDF
Format	1000 g
Density	(ISO 527) 1.8 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.025 mm
Filament length	(Ø 1.75 mm) ± 231 m / (Ø 2.85 mm) ± 87 m

Printing properties
Printing temperature	240 - 260 ºC
Print bed temperature	50 - 60 ºC
Chamber temperature	✗
Cooling fan	✗
Recommended printing speed	30 mm/s

Mechanical properties
Elongation at break	(ISO 527) 50 %
Tensile strength	(ISO 527) 58 MPa
Tensile modulus	(ISO 527) 387 MPa
Flexural strength	(ISO 178) 120 MPa
Flexural modulus	(ISO 178) 3155 MPa
Surface hardness	-

Thermal properties
Softening temperature	120 ºC

Specific properties
Transparency	✗
Flammability classification	(IEC 60695-11) UL 94 V0 @ 1.5 mm
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	52 mm
Spool width	55 mm

Adamant S1 se debe imprimir a una temperatura de entre 240 ºC y 260 ºC, y con una temperatura de base de entre 50 y 60 ºC.

Este filamento ha sido desarrollado de manera que casi no presenta warping. De todas formas, se recomienda utilizar un adhesvivo como Magigoo PA para mejorar la adhesión a la base, sobre todo al imprimir piezas de gran tamaño.

Debido a su alta densidad, la velocidad de impresión no debe superar los 40 mm/s y se deben limitar las aceleraciones.

Se recomienda subir el valor del Flow hasta el 102 - 105 %.