PolyDissolve S1 PVA 1.75 mm
search
  • PolyDissolve S1 PVA 1.75 mm
  • PolyDissolve S1 PVA 2.85 mm
Compare
You must be logged in to manage your wishlist.

PolyDissolve S1 PVA

POLY-DISSOLVE-S1-175-750
69.99 € 69.99 €
Tax excl.
Diameter
Format
Quantity

In stock 4 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 16 October
Available

PolyDissolve S1 PVA is a support filament that together with PolyDissolve S2 PVA forms part of the PolyDissolve family of soluble support filaments by Polymaker. PolyDissolve S1 PVA is PVA-based and soluble in water at >50˚C, which makes an easy to work with and filament. 

Video 1: The PolyDissolve S1 PVA support material. Source: Polymaker.

This support filament is compatible with many FDM 3D printing materials such as PLA, PETG, PA, PVB and TPU. PolyDissolve S1 PVA offers great adhesion to the surface of parts 3D printed with these materials and leaves the surface of the part impeccable once the support structures have been dissolved.

Support structures 3D printed with PolyDissolve S1 are soluble in water

Image 1: Support structures 3D printed with PolyDissolve S1 are soluble in water. Source: Polymaker.

PolyDissolve S1 PVA does not require the use of a 3D printed with a closed chamber. The recommended extrusion temperature for PolyDissolve S1 is 215-225 ºC and the best bed temperature is 25-60 ºC. The filament should be printed at a speed of 30-40 mm/s and dried at 80 ºC for 12 hours if it absorbs excess moisture. To prevent this from happening, it is highly recommended to store the filament properly and use devices such as PolyBox at the time of printing.

Part printed with PolyDissolve S1 as support filament before and after removal of the support structures

Image 2: Part printed with PolyDissolve S1 as support filament before and after removal of the support structures. Source: Polymaker.

Before sumberging the 3D printed part in water for support dissolution, the bigger parts of the support structures should be removed manually and disposed of in trash. As far as the disposal of the water containing dissolved PVA, the local Sanitary Sewer (Wastewater) Authority should be contanted to obtain the proper disposal method prior to discharging to the sewer.

General information
Material PVA/BVOH
Format 750 g
Density 1.37 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance ± 0.02 mm
Filament length (Ø1.75 mm, 0.75 kg) ±227.6 m / (Ø2.85 mm, 0.75 kg) ±85.8 m

Printing properties
Printing temperature 215-225 ºC
Print bed temperature 25-60 ºC
Chamber temperature -
Cooling fan ✓
Recommended printing speed 30-40 mm/s

Mechanical properties
Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties
Softening temperature 60 ºC

Specific properties
Transparency -

Other
HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 55 mm
Spool width 50 mm

Like other soluble filaments, PolyDissolve S1 must be stored in low humidity conditions and removed from the printer when not in use. It is recommended that Printdry or Polybox be used to prevent degradation. If the filament absorbs too much humidity, it should be dried at 80 ºC for 12 hours.

Featured properties

Printing temperature
215-225 ºC
Filament diameter
1.75 / 2.85 mm
Density
1,37 g/cm³

Related products