Draft 1L (Form 3)
search
  • Draft 1L (Form 3)
  • Draft 5L (Form 3)
You must be logged in to manage your wishlist.

Draft Resin - FormLabs

RS-F2-DRGR-02
135.00 € 135.00 €
Tax excl.
Format
Compatibility
Quantity

In stock 5 units available for immediate shipping.
units available for shipping in 5 - 8 days
Available for shipment within 5 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 9 December

Resin Draft is the bet of Formlabs to obtain ultra fast prints, up to 3-4 times faster than with a standar resin. This resin is focused on product design and engineering, where it is essential to create prototypes to check their performance, geometry and appearance before making a final model.

The key point of the Resin Draft is that it is printed with a layer height three times greater than the other resins that Formlabs had up to now. This aspect may give rise to think that its surface finish will be neglected, but not at all. The surface finish of this resin in combination with Form 2Form 3 or Form 3L is of high quality, similar to the finish of standard resins and superior to most FDM 3D printers.

Part printed with Draft resin and LFS technology.

Image 2: Part printed with Draft resin and LFS technology. Source: Formlabs. 

This formula allows for 3D printing in layers of 200 microns, allowing for a higher level of detail in the printed pieces without penalising the printing speed. Furthermore, thanks to Formlabs' advances, the Draft resin takes advantage of LFS technology to reduce support contact points, minimising post-processing times.

3D printed piece for the dental sector.

Image 3: 3D printed piece for the dental sector. Source: Formlabs.

The Draft resin has applications in various sectors, such as product design and dentistry. In the product design sector, the Draft resin allows rapid prototyping. This is very useful in the early stages of the design process, where modifications and testing of various models are required in a short period of time. In the dental industry, the Draft resin is a revolutionary material for the rapid production of orthodontic aligners and retainers

General information

Manufacturer FormLabs
Material Photopolymer
Format 1 L / 5 L
Technology SLA / LFS
Wavelength UV 405 nm
Compatible resin tanks Form 2 LT / Form 3/3B V2/V2.1, Form 3L/3BL V1/V2/V3
Compatible 3D printers Form 2 / Form 3/3+/3B/3B+/3L/3BL

Printing properties

Layer height 200 µm
Layer exposure time -
Layer off time -
Bottom layer exposure -
Bottom layer count -

Curing and washing properties

Washing time (Formwash) 10 min
Curing time (FormCure) 5 min
Curing temperature 60 ºC

Mechanical properties (uncured / cured)

Izod impact strength - KJ/m²
Charpy impact strength - KJ/m²
Elongation at break (ASTM 638) 14 % / 4 %
Tensile strength (ASTM 638) 24 MPa / 52 MPa
Tensile modulus (ASTM 638) 800 MPa / 2300 MPa
Flexural strength - MPa
Flexural modulus (ASTM 638) 600 MPa / 2300 MPa
Surface hardness -

Thermal properties (uncured / cured)

Softening temperature (ASTM 648 @ 0.45 MPa) 43 ºC / 74 ºC

Other

HS Code 2916.1
Lifetime (since manufacturing) 24 M

Below, a series of usage tips are cited that must be taken into account at all times with the use of FormLabs resins:

Change cartridge

Changing the resin cartridge of the FormLabs printers is very simple, just close the top cap of the ventilation duct (vent) and remove the cartridge by holding it by the handle it has. Then the other is inserted and the vent plug is opened in case an impression is to be started. To avoid drips through the 3D printer, this process must always be carried out with the resin tank mounted.

Vent plug FormLabs

Image 1: Vent plug of the FormLabs cartridges. Source: FormLabs

After finishing each impression the vent plug must be closed so that the resin maintains its properties. In addition, if you don't use the printer for some time, you should keep the cartridge in its original box to keep the properties of the resin intact.

Resin tank

Each type of resin must have its resin tank, which must be changed after using 2L of resin. FormLabs has developed a more powerful tank, the Resin Tank LT, which has a life up to 20 times longer than the standard tank.

FormLabs Resin Tank LT

Image 2: FormLabs Resin Tank LT. Source: FormLabs

To protect and store the excess resin in the tank after each printing, FormLabs supplies a lid that ensures a perfect closure. Once the tank is closed, it is recommended to store it (with resin and lid) in the original box so that the resin doesn't lose its properties when exposed to UV rays for a long time. Another point to keep in mind is that the tanks can't be cleaned with any cleaning product or similar (for example, isopopyl alcohol), since they lose certain qualities that can cause continuous failed impressions.

FormLabs Resin Tank

Image 3: FormLabs Resin Tank. Source: FormLabs

Failed printing

When an error occurs in printing may be because solid parts of a previous printing have fallen to the resin tank. In this case, a spatula at 45° must be passed through the printing tank, gathering all the solid parts in a corner and removing them. To ensure that the tank resin doesn't contain any solid parts, the resin should be cast with a 190 μm paper filter. Once cast, it is put back into the tank and it is ready to be used again.

Video 1: Clean resin tank. Source: FormLabs

Isopropyl alcohol

Isopropyl alcohol is the key to the washing and post-processing of parts and you should know when it is time to change it. In the Finish Kit the moment to change it's when the IPA (Isopropyl Alcohol) is so saturated with resin particles, that after washing the pieces are still sticky. At that point you must remove all the liquid, clean the container well and throw new IPA, but never fill in on the previous one.

Finish Kit FormLabs

Image 4: Finish Kit FormLabs. Source: FormLabs

In the Form Wash, the wash center itself indicates through its screen when it is time to change the isopropyl alcohol.

Video 2: FormLabs Ecosystem. Source: FormLabs

If you wish you can contract our SLA 3D printing training courses (online or in person) by contacting us through the contact form. The training is oriented to obtain a wide knowledge and know how to use the 3D SLA FormLabs printers from the beginning and t.hus avoid major errors.

Featured properties

Technology
SLA / LFS

Related products