Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Conductive PLA Proto-Pasta

Ref.: COND-PROTO-PASTA-175-500

59.95 €

Tax excl.

Diameter

Format

Volume discounts

Quantity	Discount	Price
10	10% 10%	53.96 € 53.96 €
15	15% 15%	50.96 € 50.96 €
20	20% 20%	47.96 € 47.96 €

Quantity

In stock 41 units available for immediate shipping.
units available for shipping in 3 - 7 days Available for shipment within 3 - 7 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 30 May

Available

Returns

Ask about this product

Conductive PLA filament of Proto-Pasta is composed of polymer (PLA), a dispersant and conductive carbon. It's a semi-flexible material and compatible with any desktop 3D printer.
Conductive PLA filament Proto-Pasta is ideal for use in low voltage circuits, digital keyboards that require low conductivity, Arduino, tactile sensors, robotics and electronics.

Image 1: 3D printed parts with conductive filament and operation. Source: Protopasta.

The conductive filament PLA is feasible to track any item through a resistance 1Kohm. Conductive PLA filament is more flexible than the PLA has a lower adhesion. It also presents a softening temperature similar to the PLA (around 50 degrees). As for its rigidity is low; could be considered a semi-flexible material (fracture occurs when folding the pieces repeatedly). If you want to print double head is recommended for use in conjunction with the PLA.

PLA Conductive

Image 2: PLA Conductive. Source: Protopasta.

The main features of the PLA conductive filament are:

Resistivity volumetric filament without 3D printing: 15 ohm cm
Resistivity volumetric 3D printed parts perpendicular to the layers: 30 ohm-cm
Volume resistivity of 3D printed parts through layers (along the Z axis): 115 ohm-cm
Resistance to a length of 10 cm filament 1.75 mm: 1.8 Kohm
Resistance to a length of 10 cm filament 2.85 mm: 0.6 Kohm

You can get more information on this thread in the next link. Also you can see projects conducted with the Conductive PLA filament in the next link.

It is advisable to use a hardened steel nozzle or Olsson Ruby since the particles are quite abrasives and wears out the brass nozzles.

General information
Material	PLA
Format	125 g / 500 g
Density	1.24 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø1.75 mm - 0.125 Kg) ± 41 m / (Ø1.75 mm - 0.5 Kg) ± 164 m / (Ø 2.85 mm - 0.125 Kg) ± 15 m / (Ø 2.85 mm - 0.5 Kg) ± 60 m

Printing properties
Printing temperature	195 - 225 ºC
Print bed temperature	50 - 60 ºC
Chamber temperature	✗
Cooling fan	✓
Recommended printing speed	25 - 45 mm/s

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Melting temperature	150 ºC
Softening temperature	55 ºC

Specific properties
Transparency	-

Other
HS Code	3916.9
Spool diameter (outer)	205 mm
Spool diameter (inner hole)	53 mm
Spool width	55 mm

Print with Conductive PLA Filament Proto-Pasta is almost as easy as printing with the standard PLA. It is not necessary to have a warm bed 3D printer to print the PLA conductive filament, although in the case of having a 3D printer heated bed is recommended for use to 50-60 °C because a higher adhesion is obtained.

Adherence of the first layer is key and probably the most important factors for good impressions. so you can use Magigoo, BuildTak, Blue Tape or 3DLac.