You must be logged in to manage your wishlist.
Panchroma PLA Luminous
PCHR-PLA-LUMIN-BLUE-175-1000
24.79 €
Tax excl.
The PLA Luminous filament from the Panchroma collection offers a fascinating dual effect: it displays a unique color in daylight, then glows in a similar hue when in the dark. This captivating glow is achieved by combining the base polymer with phosphorescent materials that absorb light and gradually release it, creating a soft, glowing effect in low light or complete darkness. Due to the inclusion of these phosphorescent materials, a hardened nozzle is recommended to avoid wear from the slightly abrasive components of the filament.
Image 1: The PLA Luminous filament in light vs. dark. Source: Panchroma.
Panchroma is a family of specially engineered polymer compounds that incorporate PLA. Each filament formulation is meticulously fine-tuned for its specific color and surface finish, ensuring the highest aesthetic quality and printability. These formulations can be reliably printed on any FFF/FDM 3D printer using typical PLA settings, providing both versatility and consistent results for a wide range of projects.
Image 2: Objects printed with the PLA Luminous filament in light vs. dark. Source: Panchroma.
For optimal results, PLA Luminous should be printed at an extrusion temperature between 190-230 ºC and a bed temperature of 25-60 ºC. The PLA Luminous filament supports a maximum printing speed of 200 mm/s, offering flexibility for a variety of print setups. While the spool will spin smoothly in the AMS, the filament’s abrasive nature may cause wear on the gears and PTFE tube over time. Therefore, the manufacturer recommend against using PLA Luminous with the Bambu Lab AMS to prevent premature wear and tear.
General information |
|
| Material | PLA |
| Format | 1 kg |
| Density | 1.19 g/cm³ |
| Filament diameter | 1.75 mm |
| Filament tolerance | ±0.03 mm |
| Filament length | ±349.4 m |
Printing properties |
|
| Printing temperature | 190 - 230 ºC |
| Print bed temperature | 25 - 60 ºC |
| Chamber temperature | ✗ |
| Cooling fan | ✓ |
| Recommended printing speed | Max. 200 mm/s |
| Recommended nozzle | Hardened Steel |
Mechanical properties |
|
| Charpy impact strength | (ISO 179) 3.3 ± 0.2 KJ/m² |
| Elongation at break | 2 % |
| Tensile strength | (ISO 527) XY: 52.3 ± 0.3 MPa / Z: 40.5 ± 0.5 MPa |
| Tensile modulus | (ISO 527) XY: 3427 ± 65 MPa / Z: - MPa |
| Flexural strength | 39 MPa |
| Flexural modulus | 2700 MPa |
| Surface hardness | - |
Thermal properties |
|
| Softening temperature | (ISO 306) 63 ºC |
Other |
|
| HS Code | 3916.9 |
| Spool diameter (outer) | 200 mm |
| Spool diameter (inner hole) | 55 mm |
| Spool width | 65.6 mm |
Like any 3D printing filament, the Panchroma PLA filaments should be stored properly in order to avoid their deterioration and, in consequence, extrusion problems and inferior print quality. The spool can be stored in an airtight plastic bag, in a resealable bag with a desiccant capsule, or in a smart filament container. If the filament has absorbed too much moisture, it must be dried before printing in a filament dryer for 6 hours at 55 ºC or in the PolyDryer solution. The recommended settings are setting 1 for Panchroma PLA Silk and others, and settings 1-3 for PLA Matte and Satin.
The Panchroma PLA filaments should be extruded at a temperature of 190-230 ºC on a bed heated to 25-60 ºC. It is recommended to use the cooling fan at 100% but a printer with a heated chamber is not needed. As far as the printing speed, it is recommended to use max. 200 mm/s for the PLA Silk and other Panchroma PLA varieties, max. 300 mm/s for the PLA Satin and Matte PLA, and max. 400 mm/s for CoPE.
Complex parts can be 3D printed with the Panchroma PLA filaments with the help of support filaments such as the PolySupport filament or the PolyDissolve S1 filament.
Panchroma PLA Glow and Panchroma PLA Luminous are glow-in-the-dark materials enriched with an abrasive additive, making a hardened nozzle essential for printing. These filaments should not be used in AMS systems with plastic gears or tubes due to their abrasive nature.
Extra Tools to Enhance the Printing Experience
To further facilitate the 3D printing experience, support tools such as app.polymaker.com, an interactive comparison tool for mechanical, technical, and color properties among different filaments, and wiki.polymaker.com, a quick and comprehensive guide on using our products and 3D printing recommendations, can be utilized.
Featured properties
Printing temperature
190 - 230 ºC
Filament diameter
1.75 mm
High speed compatible
Yes
Density
1.19 g/cm³
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
Premium PLA filament for 3D printing parts that will glow in the dark with a similar color.