Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Fiberlogy Refill PLA

Ref.: FIBERL-REF-PLA-BLACK-175-850

16.45 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 6 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 30 September

Available

Returns

Ask about this product

Refill PLA is a material developed by the renowned filament manufacturer Fiberlogy, which offers filaments of exceptional quality, perfect for a multitude of applications in various industries.

PLA Refill Rolls

Image 1: Rolls of Refill PLA. Source: Fiberlogy.

Refill PLA is a high quality PLA filament. PLA (polylactic acid) is a biodegradable plastic obtained from natural resources. This material is one of the most widely used in 3D printing, as it does not give off harmful gases and is very easy to print.

In addition, PLA does not require the use of 3D printers with a hot bed, and warping is practically non-existent. The low technical requirements of this material mean that it can be printed on almost any 3D printer on the market.

Image 2: Properties of PLA Refill. Source: Fiberlogy.

The finish of parts printed in Refill PLA stands out for its glossy finish, which makes it a material widely used for the manufacture of aesthetic or decorative parts, as well as for the creation of non-functional prototypes.

Refill PLA comes in a spoolless filament roll, i.e. its format is masterspool. This format requires the use of a spool holder. It is possible to download models of detachable spools ready for 3D printing, but sometimes these detachable spools do not adapt well to the dimensions of the masterspool. In these cases, it is very useful to use a variable sized spool holder that automatically adjusts to the inside diameter of the masterspool. For instructions on how to use the variable sized bobbin winder, please refer to the section "Tips for use".

Image 2: Variable spool holder. Source: Filament2print.

Fiberlogy is one of the manufacturers to include this format in its range of materials. Its quality and applications are identical to those of filaments with a spool. The only difference is that the Refill does not have a spool, thus saving resources and reducing the environmental impact.

General information
Material	PLA
Format	850 g
Density	1.24 g/cm³
Filament diameter	1.75 mm
Filament tolerance	± 0.02 mm
Filament length	± 285 m

Printing properties
Printing temperature	200 - 230 ºC
Print bed temperature	50 - 70 ºC
Chamber temperature	✗
Cooling fan	✓
Recommended printing speed	< 100 mm/s

Mechanical properties
Elongation at break	(ASTM D702) 6 %
Tensile strength	(ASTM D702) 53 MPa
Tensile modulus	(ASTM D702) 3600 MPa
Flexural strength	(ASTM D790) 83 MPa
Flexural modulus	(ASTM D790) 3800 MPa
Surface hardness	-

Thermal properties
Softening temperature	(ASTM E2092) 55 ºC

Specific properties
Transparency	-

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

When using the variable spool holder, the following guidelines should be observed:

The variable spool holder works very simply. Simply compress the product directly with your hands, insert it inside the masterspool and release it so that it returns to its original shape.
Then take one end of the filament and place it in the clamping slot. In this way, the start of the masterspool will be fixed. These slots are also used to hold the end of the filament each time a print is completed, thus avoiding possible overlapping of the filament.

To ensure optimum print quality, it is necessary to choose the right settings for each 3D printer, taking into account the printing conditions. The recommended printing temperature is between 200 and 230°C. This material does not require the use of a heated bed, although if available, it is recommended that the temperature be between 50 and 70 ºC.

Refill PLA filament has a high adhesion to the base, as well as a very good adhesion between layers. However, for optimal adhesion, an adhesive such as magigoo or Dimafix can be used.