We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Flexfill TPU 92A

Ref.: TPU-FFILL-92A-BLACK-175-500

29.17 €

Tax excl.

Diameter

Format

Colour

Quantity

In stock 15 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December

Available

Returns

Ask about this product

The Flexfill 92A TPU (Thermoplastic Polyurethane) filament is a very flexible material with a certain elasticity. It is a material with good adhesion between layers, which offers great mechanical properties, as well as high resistance to grease, oils and solvents; which makes it a very useful material in industrial applications.

Flexfill TPU 92A filament has a lower hardness than other filaments in the Flexfill TPU range, with hardnesses such as 98A. Because of its much lower hardness, Flexfill 92A filament is more complex to print on. Therefore, although it is possible, it is not recommended to print this filament with a Bowden type extruder, except for experienced users.

The Flexfill 92A filament creates very smooth surfaces, and has good resistance to abrasion and UV rays. In addition, it retains its elastic properties at low temperatures and has a high printing resolution compared to other flexible filaments such as TPE, making it more suitable for technical parts that require greater accuracy.

In the following table you can see the comparison between the different TPUs:

	TPE 70A Filaflex	TPE 82A Filaflex	TPE 90A Flexfill	TPU 92A Flexfill	TPU 93A Smartfil	TPE 96A Flexfill	TPU 98A Flexfill
Tensile strength (MPa)	32	45	5	49	40	5	53.7
Elongation at break	900 %	600 %	250 %	-	-	150 %	318 %
Absorción humedad					-
Chemical resistance	Solvent Acetone Fuel	Solvent Acetone Fuel	Water Acid Alcohol Alkali	Polish Oil	Polish Oil Solvent	Water Acid Alcohol Alkali	Polish Oil
Contact food and skin	Not recommend.	Not recommend.	Certificate	Not recommend.	Not recommend.	Reliable	Not recommend.
Permeability gases					-

Table 1: Comparison of properties of the flexible filament range

In addition to its properties, this filament is recyclable and does not contain BPA or styrene.

For all these reasons, Flexfill 92A is an ideal material for those applications that require great flexibility, a certain elasticity and properties such as resistance to grease or oil, being able to manufacture parts with great detail. In addition, in printers with two heads, the Flexfill 92A can be used to add an additional layer over the rigid base material to create a surface that is soft to the touch.

General information
Material	TPU/TPE
Format	50 g / 500 g
Density	(ISO 1183-1) 1.20 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.10 mm
Filament length	(Ø 1.75 mm - 0.5 Kg) ± 175 m / (Ø 2.85 mm - 0.5 Kg) ± 70 m
RAL/Pantone	RAL 9017 / RAL 5015 / RAL 3001 / RAL 1003

Printing properties
Printing temperature	220 - 240 ºC
Print bed temperature	50 - 60 ºC
Chamber temperature	-
Cooling fan	70 - 100 %
Recommended printing speed	20 - 30 mm/s

Mechanical properties
Elongation at break	(DIN 53504) 600 %
Tensile strength	(DIN 53504) 49 MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	(ISO 7619) Shore 92A / Shore 42D

Thermal properties
Melting temperature	215 ºC
Softening temperature	- ºC

Specific properties
Transparency	-
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	200 mm
Spool diameter (inner hole)	55 mm
Spool width	50 mm

It is advisable to use Magigoo, 3DLac or BuildTak in the base of the 3D printer so that the first Flexfill 92A TPU filament layer adheres correctly.

As for the ideal bed temperature is between 50 and 60 °C, the recommended printing temperature is between 220-240 °C and the recommended printing speed is 20-30 mm/s.

In case of problems of printing due to sliding of the filament in the head is advised not to use retraction and increase the flow in case the extrusion is intermittent, also in small parts it is also advisable to print always without retraction and with fan of the driven layer.