Facilan Ortho
search
  • Facilan Ortho
  • Facilan Ortho
  • Facilan Ortho
  • Facilan Ortho
Compare
You must be logged in to manage your wishlist.

Facilan Ortho

FACILAN-ORTHO-175-750
76.00 € 76.00 €
Tax excl.
Diameter
Format
Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December
Available

Facilan Ortho filament is a semi-crystalline polyester developed specifically for orthopaedic applications in collaboration with orthotic manufacturers and wearers.

The mechanical properties of Facilan Ortho compared to TPE

Image 1: The mechanical properties of Facilan Ortho compared to TPE. Source: 3D4Makers.

Facilan Ortho filament, made from a high-quality biodegradable plastic (EN13432 standard) based on a compostable thermoplastic. Facilan Ortho is a very flexible and resistant material, even more so than materials such as TPE, with a clean white final appearance thanks to its semi-crystallinity. Like other filaments from the manufacturer, Facilan Ortho can be remoulded in water at 55°C after printing. This means that it can be used to 3D print parts that can subsequently be fitted to a given surface, for example a patient's body.

In addition, Facilan Ortho has excellent adhesion to textiles, making it possible to combine 3D printed parts with textile insoles, midsoles or other orthotic or footwear parts. Other applications of Facilan Ortho are corrective appliances and soft appliances in orthodontics.

General information
Material PCL
Format 0.75 / 2.3 kg
Density 1.1 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance - mm
Filament length (Ø 1.75 mm 750 g) 283.5 m / (Ø 2.85 mm 750 g) 106.9 m / (Ø 1.75 mm 2300 g) 869.3 m / (Ø 2.85 mm 2300 g) 327.8 m

Printing properties
Printing temperature 130 - 170 ºC
Print bed temperature 30 - 45 ºC
Chamber temperature -
Cooling fan 100 %
Recommended printing speed 20 - 40 mm/s

Mechanical properties
Izod impact strength (ISO 180-1) 8 KJ/m²
Elongation at break (ISO 527) 15 %
Tensile strength (ISO 527) 45 MPa
Tensile modulus (ISO 527) 350 MPa
Flexural strength (ISO 178) 18 MPa
Flexural modulus (ISO 178) 380 MPa
Surface hardness (ISO 868) Shore 46 D

Thermal properties
Softening temperature (ISO 75) 57 ºC

Other
HS Code 3916.9
Spool diameter (outer) - mm
Spool diameter (inner hole) - mm
Spool width - mm

Facilan Ortho filament should be 3D printed at 130-170°C on a print bed heated to 30-45°C. The print speed should be around 10-30 mm/s, with the layer fan set to 100%. For cold extrusion (below 170 °C), "M302 S120" should be added at the beginning of the g-code.

If complex structures are to be printed with Facilan Ortho filament, a water-soluble PVA support filament or a breakaway support filament can be used.

For more detailed technical and safety information please refer to the "Downloads" section.

Featured properties

Printing temperature
130 - 170 ºC
Filament diameter
1.75 / 2.85 mm
Density
1,1 g/cm³

Related products