We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PC-ABS Proto-Pasta

Ref.: PC-ABS-PROTO-PASTA-175-500

54.95 €

Tax excl.

Diameter

Format

Quantity

In stock 7 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December

Available

Returns

Ask about this product

The PC-ABS is the creation of Proto-Pasta, an experienced company dedicated to the manufacture of special filaments such as PLA Conductive, PLA-Carbon Fiber, PLA-Stainless Steel, PLA Magnetic or Copper HTPLA.

The PC-ABS mixes the good of each material that composes it, to obtain a high performance material. On the one hand, the Polycarbonate (PC) offers high impact resistance and great rigidity, typical qualities of this material. On the other hand, the ABS transmits to this filament greater processing facility than the PC (Polycarbonate). Finally, the union of the two materials improves the resistance to heat, being one of the filaments more resistant to deformation by the temperature of the market

For satisfactory and trouble-free 3D printing, the recommended extrusion temperature is 270-290ºC. This temperature is higher than the maximum of certain 3D printers but thanks to the PT100 Upgrade Kit it's possible to get that temperature, even values close to 400ºC. The PT100 Upgrade Kit is a set of components (PT100, amplifier plate and heater block v6) developed by E3D to achieve high extrusion temperatures with almost any 3D printer. The recommended base temperature is 110-140ºC, always accompanied by a fixation method such as BuidTak, Magigoo or some other (Magigoo, DimaFix, PrintaFix, 3DLac or SmartStick) to avoid the warping effect, especially in pieces with a base dimension greater than 60mm that due to their size are prone to detach from the base due to the accumulation of internal tensions that lead to buckling of the first layers.

The PC-ABS is very sensitive to the absorption of moisture, which is why it's necessary to dry it before using it. To perform the drying you can use the PolyBox, a filament storage box that removes moisture semi-automatically. If this tool is not available, the filament must be dried in another way (domestic oven) for 1 hour at 85-95ºC.

This improved ABS is incredibly strong, making it ideal for parts that need to withstand large impacts for long periods of time. It's a material widely used by this in the automotive and electronics industry.

General information
Material	PC-ABS
Format	125 g / 500 g
Density	1.13 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	± 0.05 mm
Filament length	(Ø1.75 mm - 0.5 Kg) ± 184 m / (Ø 2.85 mm - 0.5 Kg) ± 70 m

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Printing properties
Printing temperature	260 - 280 ºC
Print bed temperature	120 ºC
Chamber temperature	✗
Cooling fan	✓
Recommended printing speed	20 - 80 mm/s

Thermal properties
Softening temperature	- ºC

Specific properties
Transparency	-

Other
HS Code	3916.9
Spool diameter (outer)	205 mm
Spool diameter (inner hole)	53 mm
Spool width	55 mm

Use as starting parameters temperature of the extruder 260ºC and of the base 120ºC, from there adjust the configuration to your 3D printer. Adhesion between layers can be a problem if the temperature is below 260°C. Using a HotEnd temperature of 260-280ºC with a nozzle of 0.50mm, it's possible to print 60mm long pieces without any problem. To ensure adhesion to the base, a temperature of 120ºC combined with BuildTak, Magigoo or some other fixing product (DimaFix, PrintaFix, 3DLac or SmartStick) should be used.

Use as starting parameters temperature of the extruder 260ºC and of the base 120ºC, from there adjust the configuration to your 3D printer. Adhesion between layers can be a problem if the temperature is below 260°C. Using a HotEnd temperature of 260-280ºC with a nozzle of 0.50mm, it's possible to print 60mm long pieces without any problem. To ensure adhesion to the base, a temperature of 120ºC combined with BuildTak, Magigoo or some other fixing product (Magigoo, DimaFix, PrintaFix, 3DLac or SmartStick) should be used.