Accessories

Naturally biodegradable solvent for dissolving the HIPS filaments (polystyrene). 

The Kit of 11 Allen keys is the basic tool that every user of a 3D printer should have.

The precise tweezers facilitate both the maintenance or repair and the daily use of the 3D printer.

One of the most recommended fans as a layer fan for your 3D printer.

Metal dust container compatible with Sinterit products.

Cleaning brushes to maintain the 3D printer.

Nitrogen generators with pressure swing adsorption technology compatible with SLS 3D printers.

Temperature sensors that vary the resistance depending on the temperature at which they are exposed.

Cyclone powder separator for the Sinterit ATEX Vaccum Cleaner.

The heat shrink tube is a wrapper to isolate and strengthen mainly the electronics cables.

920 W industrial drying unit compatible with any polymer.

Debinding and sintering service for Zetamix ceramic and metallic filaments.

Increase printing temperature to 400°C with a much more accurate reading for all HotEnd v6 de E3D.

Set of essential components to give a smooth and shiny finish.

High temperature tips (nozzles) compatible with the Gearbox HT2 and Stratasys Fortus 3D printers.

Replacement of the interchangeable tips for the finishing tool Modifi3D.

Magigoo is the new generation of components for adhesion to the 3D printing base.

Acrylic solution that softens the surface of all types of parts.

Abrasion resistant copper and hardened steel Revo nozzle with E3DLC non-stick coating.

REVO nozzles that enable high volumetric flow rates and faster 3D printing.

7mm wrench for mounting and unmounting the E3D nozzle.

Cleaning needle for nozzles (0.3mm diameter).

Abrasion resistant REVO nozzles for printing at temperatures of up to 500 ºC.

Original nozzles compatible with various models of Anycubic FDM 3D printers.

Original E3D pack of nozzles of different materials for the HotEnd E3D v6.

Adhesive liquid used to improve the adhesion of pieces, especially suitable for use with Polypropylene.

Waterproofing valid for all existing materials for 3D printing.

Nozzles available in brass and hardened steel for Raise3D Pro 2/Pro 3/E2 printers.

Filament dryer with a touch screen, 360º heating and a wide range of compatible materials.

Original nozzle with an all-metal filament guide. Only for the Prusa MK4 and XL 3D printers.

Nozzle for the original HotEnd v6 and Volcano versions of E3D for filaments with fibers.

Stainless steel nozzle compatible with Ultimaker 2.

Valid acrylic cleaner to clean the most delicate areas of 3D printer.

High-end nozzles in various materials and diameters for the K1 and K1 Max 3D printers from Creality.

Filament storage box with hygrometer. Available with or without compact drying unit.

Nozzle for the original HotEnd v6, Volcano and SuperVolcano versions of E3D.

Kit that updates the original E3D Titan Extruder on the Titan Aero.

High performance and high durability, recommended for high printing temperatures.

MMU3 add-on for Prusa MMU2S, MK3S+ and MK4 that allows printing with 5 filaments simultaneously.

Ultra-resistant nozzle with a diamond tip. Compatible with many systems, materials and printers.

Silicone case to keep clean and prevent deterioration of the E3D v6 and Volcano Original HeatBreak.

The heater block most used in the world of 3D printing.

Nozzles for Raise 3D E2CF 3D printers.

Revo CR hotend compatible with the Creality 3D printers.

Part evaluation, debinding and sintering service. Only for Forge1 3D printer owners.

Special dye for synthetic materials, to obtain finishes in different colors.

Filament sensor compatible with a wide range of FDM 3D printers on the market.

Original E3D Hotend with Revo system compatible with Voron printers.