Accessories

High performance cartridge heater with 50 W of power.

Non-stick coating to keep the metal components of the hotend clean.

High-performance thermal paste for hotends, stable up to 1000 ºC and with a conductivity of 31.44 W/mK.

Simple, safe and environmentally friendly cleaning agent developed to dissolve alkaline-soluble support materials.

A direct extruder specially designed for the Creality 3D printers of the CR-10, CR-20 and Ender series.

Hotend by Micro Swiss for 3D Creality printers.

The highest quality PTFE tube on the market. Hight diameter, good tolerances and high lubricity.

Special cutter for PTFE tube. Its sharp blade allows clean and perfectly square cuts.

The direct extruder for Creality printers compatible with the Slice Mosquito and Slice Copperhead hotels.

Tool to improve the finish of 3D printed parts easily and without excessive adjustment.

Original E3D Hotend perfect for increasing print speed. 

Automatic powder sieve shaker for SLS. The must-have accessory from Sinterit for Lisa and Lisa Pro.

Nozzles for Raise 3D printers.

Tool for self-tapping inserts type ensat M4, M5 and M6.

Nozzles of different materials and outlet diameters made by 3DSolex Bondtech.

Rugged and low friction nozzles for MK8, CR-10S Pro, Ultimaker 3 and Ultimaker S5. 

Key element of the Original E3D hotend v6 for proper filament extrusion.

Official borosilicate glass replacement for the printing base of BCN3D 3D printers.

Refractory powder for sintering printed parts with Filamet™ metal filaments.

Crucible needed to sinter 3D printed parts with Filamet™ metallic filament.

Threaded brass and stainless steel inserts for 3D printing manufactured parts.

HEPA filter valid for Raise3D 3D printers.

Heater cartridge for Raise3D printers.

A tool for the easy cutting or retouching of any protrusion on a part.

It allows to print any advanced material, supporting very high extrusion temperatures.

Two-component glue (cyanoacrylate and methacrylate) that is cured in a few minutes (3-6 min).

Ultra fast curing glue perfect for 3D printing.

Bondtech extruder assemblies available for a wide variety of 3D printers.

The most durable and accurate nozzle on the market, valid for all materials.

Tool for exchanging any type of nozzle with total safety.

Basic fastener for users who use a glass or PEI printing surface.

Professional post-processing tool for 3D printing.

Hermetic containers with vacuum sealing to store filaments safely.

Finishing, repairing and modifying tool for 3D printing pieces.

This digital monitor shows the humidity and temperature in the work room or the filament.

Original E3D hotend with high printig temperature up to 285 ˚C.

Special HotEnd for fast and accurate 3D printing.

Extruder with high performance combined with a low weight, thanks to the Dual-Drive system.

Full Kit with the combination of the E3D v6 and the original Volcano E3D.

Extruder with high performance thanks to its Dual-Drive system and planetary gear reducer system.

Fixative substance designed for 3D printing with FDM / FFF technology for heated bed.

Ultrasonic cutting tool that allows you to cut many materials quickly and easily.

3D printing surface easy to install and resistant to various prints and materials.

Ideal for removing resin residues from parts made with the 3D SLA printer.

Allow to obtain new surface finishes and add new properties to the parts.

The caliper is an indispensable tool to take accurate measurements.

Ideal for all 3D printing users that make own filament with Filastruder.

3D printing surface easy to install and ideal for common filaments.