Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
The Timberfill Southern Pine filament is part of the Timberfill family of materials by the Czech brand Fillamentum. The Timberfill filaments are biopolymers containing real wood fibers which gives the 3D printed parts an authentic look and temporary smell of wood. The Timberfill Southern Pine filament is a PLA composite filled with 15 % of non-abrasive natural spruce fibers and biodegradable in industrial composters (months). It should be noted that the color tone of the printed parts may vary slightly from part to part due to the natural origin of the material.
The 3D printed parts are characterized by an aesthetically appealing wood finish and when extruded, the Timberfill Southern Pine filament gives out a pleasant spruce smell that lingers in the part for a while after. The filament is characterized by ease of printing just like standard PLA, even at high speeds, due to its very low tendency to warp or shrink. The temperatures resistance of parts 3D printed with the Timberfill Southern Pine filament can be increased from 55 ºC to 80 ºC by submitting the part to the process of annealing.
Another advantage offered by the Timberfill Southern Pine filament is that the 3D printed parts can be tinted or post-processed with the help of sandpaper, and can be safely used in electrical and electronic equipment. These properties combined with the aromatic nature of this filament make the Timberfill Southern Pine filament ideal for the 3D printing of decorative objects or non-functional prototypes.
Elongation at break (%) | 2 |
Tensile strength (MPa) | 39 |
Tensile modulus (MPa) | 3200 |
Surface hardness | 8 |
Softening temperature (ºC) | 48 |
Biodegradable | Biodegradable |
Fiber reinforced | Fiber reinforced |
It is necessary to follow a few steps to avoid problems during and after printing with Timberfill Southern Pine filament:
It is absolutely necessary to store Timberfill Southern Pine filament in a dry environment, in a sealed bag with desiccant or in a smart filament container. If the filament absorbs too much moisture, it should be dried in a filament dryer for 2 hours at 50°C. Processing wet filament can lead to degradation of the polymer chains, brittleness, poor adhesion of layers, stringing, oozing, etc.
More tips on how to print with Timberfill Southern Pine filament can be found in the Downloads section.
General information | |
---|---|
Manufacturer | Fillamentum (Czech Republic) |
Material | Fiberboard with polymer bonding (Timberfill) |
Format | Pack of 50g Spool of 0.75 kg |
Density | 1.26 g/cm3 |
Diameter of filament | 1.75 or 2.85 mm |
Diameter tolerance | ±0,1 mm |
Filament length | ±16.5 m (Ø 1.75 mm - 0.05 Kg) ±6.2 m (Ø 2.85 mm - 0.05 Kg) ±247.5 m (Ø 1.75 mm - 0.75 Kg) ±93.3 m (Ø 2.85 mm - 0.75 Kg) |
Color | Timberfill "Southern Pine" |
RAL/Pantone | - |
Print settings | |
Printing temperature | 150-170 ºC |
Print bed temperature | 50-60 ºC |
Chamber temperature | ✗ |
Cooling fan | 100 % |
Recommended printing speed | 40-60 mm/s |
Nozzle diameter | > 0.4 mm |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength (ISO 179) | 22 kJ/m2 |
Elongation at break (ISO 527) | 2 % |
Tensile strength (ISO 527) | 39 MPa |
Tensile Modulus (ISO 527) | 3200 MPa |
Flexural strength | - |
Flexural modulus | - |
Surface hardness (ISO 7619) | Shore 77D |
Thermal properties | |
Softening temperature (ISO 75) | 48 ºC |
Melting temperature | 145-160 ºC |
Specific properties | |
Transparency | ✗ |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outside) | 200 mm (0.75 kg spool) |
Diameter coil (inner hole) | 55 mm (0.75 kg spool) |
Coil Width | 50 mm (0.75 kg spool) |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
36,36 €
36,36 €
36,36 €
36,36 €
7,50 €
26,00 €
28,92 €
28,92 €
28,92 €
33,02 €
32,00 €
38,25 €
38,25 €
35,00 €
16,75 €
22,90 €
22,90 €
22,90 €
38,25 €
37,97 €
36,36 €
36,36 €
36,36 €
22,50 €
56,99 €
23,95 €