Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesIgus is a German brand of filaments and plastics with special properties. They specialise in creating filaments for 3D printing with high friction resistance, up to 50 times higher than conventional materials.
Iglidur A350, an abrasion and high temperature resistant filament, is temperature resistant up to 180°C, flame retardant according to UL94-V0 and can be steam sterilised, i.e. steam under pressure in an autoclave, eliminating any form of microbial life by denaturing the proteins within the microorganisms.
Due to its high processing temperature of between 340-360°C and a mandatory installation temperature of a minimum of 160°C, a high-temperature 3D printer is required.
iglidur A350 is a filament that stands out mainly for being suitable for food contact. It is focused on the food and packaging industry as it complies with the EU 10/2011 and FDA food contact regulations, so its main applications range from prototypes to mass production.
On the other hand, it is not recommended to use this filament when high wear resistance is required or if the 3D printer used does not have a heated chamber of up to 180º.
This filament absorbs moisture easily so it is recommended to store it in a drying container such as Printdry or in a case such as Fiber Three Safe to avoid problems when printing.
Abrasion resistance | Abrasion resistance |
This filament absorbs moisture easily so it is recommended to store it in a drying container such as Printdry or in a case such as Fiber Three Safe to avoid problems when printing.
In the following link, you will find more detailed information as well as different technical and user manuals for the iglidur A350-PF filament.
General information | |
---|---|
Manufacturer | Igus® (Europe) |
Material | iglidur® A350-PF |
Format | Spool of 0.750 kg |
Density | 1.42 g/cm3 |
Diameter of filament | 1.75 mm |
Diameter of filament | - |
Filament length | - |
Color | Blue |
RAL/Pantone | - |
Print settings | |
Printing temperature | 340 -350 °C |
Print bed temperature | 180 - 200 °C |
Chamber temperature | Not necessary |
Cooling fan | Not recommended |
Recommended printing speed | - |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | - |
Tensile strength | - |
Tensile Modulus | - |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | - |
Thermal properties | |
Softening temperature | - |
Minimum service temperature | - |
Melting temperature | - |
Specific properties | |
Transparency | - |
Maximum water absorption | 1,9 Wt.-% |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | 200 mm |
Diameter coil (inner hole) | 52 mm |
Coil Width | 55 mm |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
119,45 €
59,95 €
89,25 €