PET support Raise3D View larger

PET support Raise3D

Raise3D

New product

3 Items

56,00 €
56,00 €

Ask for information

Break-away support filament designed to be used with fiber reinforced filaments.

Raise3D is one of the leading manufacturers of FDM 3D printers and accessories today, committed to offering high quality 3D printers with innovative components and operating systems, while maintaining a price point that is suitable for most professional users. In addition to printing equipment, Raise3D develops optimised technical materials for its equipment, as well as support materials so that users can manufacture complex, high quality parts.

Raise3D PET Support filament is a break-away support material specially developed for use in combination with the Raise3D industrial fiber reinforced filaments PET CF and PET GF. When combined with these materials, PET Support can help create parts with large overhangs or cavities

Part printed with PET GF (orange) and the PET support filament

Image 1: Part printed with PET GF (orange) and the PET Support filament. Source: Raise3D.

The support structures made with PET Support are much easier to remove than support printed with the main material, and leave a smooth and clean part once removed, helping achieve parts with a detailed surface quality and dimensional accuracy.

Thanks to the lower moisture absorption and an attractive performance-cost ratio, the PET Support filament is an excellent alternative to support materials such as BVOH or PVA. Even though the PET Support filament can be used with other CF and GF filaments by Raise3D, it is highly recommended to use it in combination with PET CF and PET GF for best results.

Raise3D PET Support filament has a high compatibility with Raise3D PET CF and PET GF industrial filaments. As for other fibre-reinforced filaments, compatibility depends on the geometry of the 3D printed part.

PET Support is sensitive to moisture and should be stored and used under dry conditions (surrounding humidity below 15 %). It is highly recommended to dry PET Support at 70-80 °C for 8-12 hours before printing in a filament dryer.

The PET Support filament should be extruded at 260-300 ºC on a bed heated to 60-80 ºC. The printing speed range for this material is 35-120 mm/s abd it is recommended to have the layer fan turned on.

General information
Manufacturer Raise 3D
Material PET Support
Format Spool of 1 kg
Density 1.16 g/cm3
Diameter of filament 1.75 mm
Diameter tolerance -
Filament length ± 358.4 m
Color Natural
RAL/Pantone -
Print settings
Printing temperature 260-300 ºC
Print bed temperature 60-80 ºC
Chamber temperature -
Cooling fan
Recommended printing speed 35-120 mm/s
Layer height 0.1-0.25 mm
Mechanical properties
Izod impact strength -
Charpy impact strength  -
Elongation at break -
Tensile strength  -
Tensile Modulus  -
Flexural strength  -
Flexural modulus -
Surface hardness  -
Thermal properties
Softening temperature  -
Melting temperature -
Additional Information
HS Code 3916.9
Diameter coil (outer) -
Diameter coil (inner hole) -
Coil Width


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

Accessories

30 other products in the same category: