Sandblaster - Cabina de chorreo seco View larger

Sandblaster - Sandblast booth



New product

790,00 €
790,00 €

Ask for information

Compact sandblast booth for cleaning and polishing parts printed on SLS technology.

Although one of the advantages of SLS printing is that post-processing not require to remove supports, as is the case with SLA and FDM printing, but cleaning must be carried out to remove excess of unsintered powder that may remain adhered to the part's surface or deposited inside the holes.

To carry out this cleaning in the most efficient way, it is necessary to apply compressed air or sometimes sandblasting. In order to facilitate this task, Sinterit offers, as a complement to its Lisa and Lisa Pro printers, Sinterit Sandblaster, a compressed air booth and sandblasting with everything necessary to leave the printed parts ready for use.

Sandblaster vista trasera

Image 1: Sinterit Sandblaster rear view. Source: Sinterit

This compact cabin has a working volume of 410 x 310 x 200 mm and a maximum working pressure of 8 bar. Among the characteristics of this cabin stand out the control of the compressed air by foot pedal or the ability to regulate the air pressure* between 6 and 8 bar by means of an accessible regulator.

This cabin can be used only with compressed air or with abrasive material. For this purpose, it has a tank with a capacity for 5 Kg of 200 µm glass spheres.

Vista interna de Sinterit Sandblaster

Image 2: Internal view of Sinterit Sandblaster. Source: Sinterit

Sinterit Sandblaster not only helps to clean and polish printed parts, but also, by processing parts inside a closed booth, it helps to keep the workspace clean.

This makes it an essential complement in those areas that cannot have adequate spaces for the post-processing of the pieces, such as educational environments, R&D&I laboratories, small architecture and design studios ...

* Requires compressed air supply source (6 - 8 bar)

Manufacturer Sinterit
Product Compressed air / Sandblasting cabinet
Certificates CE
Compressed air pressure 6 - 8 bar
Abrasive material 200 µm glass spheres
Abrasive material tank capacity 2 L / 4.5 Kg
Work volume 410 x 310 x 200 mm
Electrical properties
Input 230 V AC 50 Hz
Max. power consumption -
Dimesions and weight
Product dimensions  480 x 370 x 360 mm
Product weight 15.0 Kg
Package dimensions 500 x 500 x 500 mm
Package weight 20 Kg
HS Code 8424.3010
Content Sinterit Sandblaster
4 Kg of abrasive material
User manual


18 other products in the same category: