Material abrasivo para Sandblaster y Sandblaster XL
search
Compare
You must be logged in to manage your wishlist.

Abrasive material for Sandblaster and Sandblaster XL

ABRASIVE-SINTERIT-4KG
30.00 € 30.00 €
Tax excl.
Quantity

In stock 7 units available for immediate shipping.
units available for shipping in 10 - 14 days Available for shipment within 10 - 14 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 13 September
Available

Parts printed using SLS technology require a post-processing process to clean them and remove any un-sintered dust that remains on the surface.

The most convenient and efficient way to clean and improve the surface finish of parts produced using SLS 3D printing is to use compressed air and dry blasting. This is why having a blasting cabin and a source of compressed air is very useful during the SLS 3D printing workflow.

Therefore Sinterit offers two cabins adapted to all types of users: Sinterit Sandblaster and Sinterit Sanblaster XL.

Sandblaster vs Sandblaster XL

Image 1: Sinterit Sandblaster and Sandblaster XL. Source: Sinterit

These cabins use compressed air to project small particles of silica on to the surface of the workpiece. Thanks to this, it is possible to remove the un-sintered dust that remains on the surface and which is often very difficult to remove by other methods. In addition, it removes irregularities from the surface providing a better surface finish.

The abrasive material for Sandblaster and Sandblaster XL consists of small silica particles of 200 um and it is available in 4 kg format.

General information
Manufacturer Sinterit
Material SiO2 (silica)
Average granulation 200 μm
Quantity 4 kg

Other
HS Code 2505.10

For the correct functioning of Sandblaster and Sandblaster XL, it is necessary to add 4 and 8 kilos of abrasive material respectively.

Because the abrasive material becomes contaminated with dust during use, it loses its effectiveness over time and must be replaced frequently. To maximize the life of the abrasive material it is recommended to remove as much powder as possible from the work piece before it is introduced into the cabin.