You must be logged in to manage your wishlist.
PA12 pellets (in powder)
PELLETS-PA12-PWD-005010-1KG
28.00 €
Tax excl.
These nylon 12 pellets are an FGF 3D printing material used for direct extrusion or filament production. PA12 pellets have a particle size of 0.05-0.10 mm and are available in white. It should be noted that the polyamide material absorbs water-based dyes very well and could even be dyed.
A unique feature of this material is the very small particle size, which makes the pellets look like dust. However, these PA12 pellets are intended for FGF 3D printing and cannot be used in SLS 3D printing equipment, as there is a risk of damaging the SLS 3D printer.
The best equipment for processing the PA12 pellets is the Mahor V4 pellet extruder or Tumaker 3D printers for direct extrusion. Tumaker 3D printers in the dual extrusion variant are particularly suitable for printing with the PA12 pellets as a carrier material, even in combination with filament. It is also possible to produce filament from the PA12 pellets with the help of the Felfil EVO extruder or the Filastruder.
General information |
|
| Manufacturer | Lay Filaments |
| Material | PA |
| Format | 1 kg |
| Density | 0.45 g/cm³ |
| Average granulation | 0.05-0.1 mm |
Mechanical properties |
|
| Izod impact strength | 4.4 KJ/m² |
| Elongation at break | 18 % |
| Tensile strength | 42 MPa |
| Tensile modulus | 1650 MPa |
| Flexural strength | 53 MPa |
| Flexural modulus | 1500 MPa |
| Surface hardness | Shore 75 D |
Thermal properties |
|
| Melting temperature | - ºC |
| Softening temperature | - ºC |
| Processing temperature | 260 ºC |
| MFR Ratio | - |
| Glass transition temperature | - ºC |
| Heat deflexion temperature | 163 ºC |
Specific properties |
|
| Chemical resistance | ✓ |
Other |
|
| HS Code | 3901.1 |
| General information | |
|---|---|
| Material | Polyamide 12 (PA12) |
| Format | Bag of 1 Kg |
| Density | 0.45 g/cm3 |
| Color | White |
| Particle/grain size | 0.05-0.1 mm |
| Mechanical properties | |
| Izod impact resistance | 4.4 KJ/m2 |
| Charpy impact resistance | - |
| Ultimate breaking strength | - |
| Maximum strain at break | 18 % |
| Tensile strength | 42 MPa |
| Tensile modulus | 1650 MPa |
| Bending strength | 53 MPa |
| Bending modulus | 1500 MPa |
| Surface hardness | 75D Shore |
| Thermal properties | |
| Processing temperature | - |
| Heat deflection temperature (HDT) | 163 ºC |
| Glass transition temperature | - |
| Melting temperature | - |
| MFR Ratio | - |
| Additional information | |
| HS Code | 3901.1 |
* The typical values listed in this table should be considered as a reference. We advise you to confirm the final results and properties with your own tests. For further information please refer to the product data sheet.
Related products
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
You must be logged in to manage your wishlist.
PA12 pellets in powder format (very small particle size), for extruding in pellets extruders.