We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PA12 pellets (in powder)

Ref.: PELLETS-PA12-PWD-005010-1KG

28.00 €

Tax excl.

Size

Format

Colour

Quantity

In stock 10 units available for immediate shipping.
units available for shipping in 1 - 2 days Available for shipment within 1 - 2 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December

Available

Returns

Ask about this product

Description
Specifications

These nylon 12 pellets are an FGF 3D printing material used for direct extrusion or filament production. PA12 pellets have a particle size of 0.05-0.10 mm and are available in white. It should be noted that the polyamide material absorbs water-based dyes very well and could even be dyed.

A unique feature of this material is the very small particle size, which makes the pellets look like dust. However, these PA12 pellets are intended for FGF 3D printing and cannot be used in SLS 3D printing equipment, as there is a risk of damaging the SLS 3D printer.

The best equipment for processing the PA12 pellets is the Mahor V4 pellet extruder or Tumaker 3D printers for direct extrusion. Tumaker 3D printers in the dual extrusion variant are particularly suitable for printing with the PA12 pellets as a carrier material, even in combination with filament. It is also possible to produce filament from the PA12 pellets with the help of the Felfil EVO extruder or the Filastruder.

General information
Manufacturer	Lay Filaments
Material	PA
Format	1 kg
Density	0.45 g/cm³
Average granulation	0.05-0.1 mm

Mechanical properties
Izod impact strength	4.4 KJ/m²
Elongation at break	18 %
Tensile strength	42 MPa
Tensile modulus	1650 MPa
Flexural strength	53 MPa
Flexural modulus	1500 MPa
Surface hardness	Shore 75 D

Thermal properties
Melting temperature	- ºC
Softening temperature	- ºC
Processing temperature	260 ºC
MFR Ratio	-
Glass transition temperature	- ºC
Heat deflexion temperature	163 ºC

Specific properties
Chemical resistance	✓

Other
HS Code	3901.1

General information
Material	Polyamide 12 (PA12)
Format	Bag of 1 Kg
Density	0.45 g/cm³
Color	White
Particle/grain size	0.05-0.1 mm
Mechanical properties
Izod impact resistance	4.4 KJ/m²
Charpy impact resistance	-
Ultimate breaking strength	-
Maximum strain at break	18 %
Tensile strength	42 MPa
Tensile modulus	1650 MPa
Bending strength	53 MPa
Bending modulus	1500 MPa
Surface hardness	75D Shore
Thermal properties
Processing temperature	-
Heat deflection temperature (HDT)	163 ºC
Glass transition temperature	-
Melting temperature	-
MFR Ratio	-
Additional information
HS Code	3901.1

* The typical values listed in this table should be considered as a reference. We advise you to confirm the final results and properties with your own tests. For further information please refer to the product data sheet.