Flexfill PEBA 90A


Temporarily out of stock

New product

69,84 €
69,84 €

Ask for information

Flexible polyamide based filament with excellent mechanical properties.

The Flexfill PEBA 90A filament belongs to the flexible filament family of the manufacturer Fillamentum, known for the high quality of its filaments, the colouring it offers and its perfect winding, free of overlaps.

Unlike the other filaments in the Flexfill range, the composition of Flexfill PEBA 90A is based on Amide Block Polyether (PEBA).

PEBA is a flexible polyamide without plasticisers. This polyamide content ensures excellent mechanical properties such as wear resistance, low coefficient of friction, high fatigue resistance, exceptional flexibility and a very high chemical resistance, especially towards oils and fuels, non-polar hydrocarbons, ozone and certain acids (it is recommended to test the resistance with a piece of filament or object printed with this material).

Piece printed with Flexfill PEBA 90A.

Image 1: Piece printed with Flexfill PEBA 90A. Source: Fillamentum.

Another property that sets Flexfill PEBA 90A apart from other flexible filaments is its low density, the lowest in the entire Flexfill range; and its resistance to low temperatures. The impact resistance and flexibility of this material is maintained down to -60ºC.

The Flexfill PEBA 90A filament has excellent optical properties, brightness and translucency. Parts printed with this material have a smooth and pleasant surface.

Parts 3D printed with Flexfill PEBA 90A in blue, black, red and yellow

Image 2: Parts 3D printed with Flexfill PEBA 90A in blue, black, red and yellow. Source: Fillamentum.

One of the applications of this material is in the manufacture of shoe soles. This application is made possible by the high energy return, the abrasion resistance and the low density of the Flexfill PEBA 90A. Its high resistance to dynamic stress due to cyclic movements and its low creep make it also very useful in the manufacture of objects that transfer vibration.

Video 1: Energy return Flexfill PEBA 90A. Source: Fillamentum.

Flexfill PEBA 90A can also be used for the production of electrical and electronic equipment, as it acts as an insulator. Furthermore, it does not contain any restricted substances. However, this material is not recommended for use in food contact or medical applications.

Elongation at break (%) 1000
Tensile strength (MPa) 36
Flexural modulus (MPa) 65
Surface hardness 4
Flexibility Flexibility
Abrasion resistance Abrasion resistance
Vibration resistance Vibration resistance
Lightweight Lightweight
Chemical resistance Chemical resistance
Hide color variations (Hide color variations)

To use the Flexfill PEBA 90A filament it is recommended to use a printing temperature of between 225 and 245 ºC, and a bed temperature of between 70 and 90 ºC. Ideally, a 3D FDM printer with a heated chamber should be used, although this is not essential. It is recommended to use a mirror, glass or PEI base for printing, although the latter may be more difficult.

In addition to this, it is recommended to use an adhesive such as Magigoo PA, which will help improve adhesion to the base especially when printing large pieces, avoiding the warping effect. It is also very useful to activate a 5 mm brim around the piece to be printed.

As for the printing speed, it is recommended to start at 20 - 30 mm/s and increase the speed according to the results obtained and the experience with the material. The layer fan should be turned off, especially during the printing of the first layers, to avoid the warping effect.

It is recommended to keep the filament in an airtight container with desiccant sachets or to use a vacuum sealed PrintDry container. If exposed to damp conditions, it is recommended that the filament is dried in the PrintDry II filament dryer at 70°C for 3 hours. Using the filament wet can cause degradation of the polymer, increase the brittleness of the material or affect the adhesion of layers when printing a 3D part.

General information
Manufacturer Fillamentum (Czech Republic)
Material Flexfill PEBA 90A
Format Spool of 500g
Density 1.00 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0,10 mm
Filament length ±207 m (Ø 1.75 mm-0.5 kg)
±78.4 m (Ø 2.85 mm-0.5 kg)
Colors "Natural"
"Black Transparent"
"Yellow Transparent"
"Red Transparent"
"Blue Transparent"
Print settings
Printing temperature 225-245 ºC
Print bed temperature 70-90 ºC
Chamber temperature Recommended
Cooling fan Recommended
Recommended printing speed 20-40 mm/s
Mechanical properties
Izod impact strength  -
Charpy impact strength -
Elongation at break (DIN 53504) 1000 %
Tensile strength (DIN 53504) 36 MPa
Tensile Modulus -
Flexural strength -
Flexural modulus 65 MPa
Tear resistance 85 KN/m
Surface hardness Shore 90A / Shore 42D
Abrasion resistance (ISO 4649) < 48 mm3
Thermal properties
Softening temperature  -
Melting temperature -
Specific properties
Transparency  -
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm 
Diameter coil (inner hole) 55 mm 
Coil width 50 mm 

* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.


30 other products in the same category: