IND403 HDT80 High Modulus resin - Loctite 3D View larger

IND403 HDT80 High Modulus resin - Loctite 3D

Loctite

New product

6 Items

230,00 €
230,00 €

Ask for information

High temperature resin for parts with great surface quality and high dimensional accuracy.

The IND403 HDT80 High Modulus resin from the Loctite family of high temperature resins is characterized by high heat deflection temperature (80 ºC), and it prints tough parts with good dimensional stability and a great surface finish, capable of withstanding mechanical stresses and maintaining their properties over long periods of time.

The IND403 HDT80 High Modulus resin is the perfect material for the additive manufacturing of tooling and molds (silicone casting, low pressure molding, open mold PU molding), as well as interior applications in the automotive sector, fast product development and rapid process iteration.

A part 3D printed with the Loctite IND403 HDT80 High Modulus resin

Image 1: A part 3D printed with the Loctite IND403 HDT80 High Modulus resin. Source: Loctite.

The IND403 HDT80 High Modulus resin has been formulated to print optimally on industrial DLP printers. Before printing with this material, the user should read safety and technical information available in the Downloads section. In the Usage Tips section useful resources can be found on printer compatibility, recommended post-processing settings, and proper resin storage.

Elongation at break (%) 10
Tensile strength (MPa) 67
Tensile modulus (MPa) 2572
Flexural modulus (MPa) 2654
Surface hardness 8

On the Henkel YouTube channel, various videos are available on:

  1. How to work with 3D printing resins:

    Video 1: The basics of printing with resin. Source: Henkel.
  2. How to properly store 3D printing resins:

    Video 2: How to properly store resins. Source: Henkel.
  3. How to post-process parts 3D printed with resin:

    Video 3: Resin post-processing tips. Source: Henkel.

The material's technical and safety datasheets can be found in the Downloads section. On the manufacturer's website the user can find the printer validation information as well as the recommended printing and postprocessing settings.

General information
Manufacturer Loctite
Technology  DLP
Material Photopolymer
Wavelength -
Format 1 kg
5 kg
Color Black
Compatible 3D printers DLP
Printing properties
Layer height -
Layer exposure time -
Layer cooling time -
Lifting height -
Exposure of lower layers -
Number of bottom layers -
Curing and washing properties
Washing time 2-4 min
Curing time 4-20 min
Curing temperature -
Mechanical properties
Izod impact resistance (ASTM D256) 27 + 5 J/m
Charpy impact resistance -
Elongation at break (ASTM D638) 10 %
Tensile strength (ASTM D638) 67 MPa
Tensile modulus (ASTM D638) 2572 MPa
Bending strength  -
Bending modulus (ASTM D790) 2654 MPa
Surface hardness (ASTM D648) Shore78 D
Thermal properties
Softening temperature -
Brightness value -
Electrical properties
Volumetric resistivity (ASTM D257) 2.5E +15 Ω·cm
Surface resistivity (ASTM D257) 1.9E +15 Ω
Dielectric strength (ASTM D149) 25 + 1 kV/mm
Additional information
Service life -
HS Code 2916.1


* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.

Accessories

30 other products in the same category: