Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesThe Liqcreate portfolio of engineering resins counts with the Strong-X resin, a material characterized by high strength and stiffness, as well as great resistance to high temperatures. Strong-X is an easy to print opaque grey resin with low odor during printing and low shrinkage of the parts.
These features make the Strong-X resin perfect for heavy duty industrial applications (injection molding), or in the electronic or aerospace industry. The flexural strength of the Strong-X resin (135 MPa) is similar to that of some of the leading indystrial cyanate ester resins.
The Strong-X resin can be used on many open source 3D printers by brands such as Uniz, Formlabs, Zortrax, Anycubic, Creality or Phrozen thanks to the wide range of compatible light sources (385-420 nm). The full list of compatible printers is available here.
Elongation at break (%) | 8 |
Tensile strength (MPa) | 70 |
Tensile modulus (MPa) | 3200 |
Flexural strength (MPa) | 130 |
Flexural modulus (MPa) | 3300 |
Surface hardness | 9 |
In order to ensure resin longevity and successful 3D prints, it is advised to store the Strong-X resin in a clean and dry environment, out of direct sunlight and in a temperature of 5-30 ºC. Before use, the resin bottle should be shaken energetically for at least 1 minute (at least 3 minutes in the case of filled resins) and then left to rest for around 10 minutes to let the air bubble escape. Leftover resin can be poured back into the bottle but it should be first filtered to ensure there is no polymer residue present. Safety equipment such as protective garments, gloves and face protection is highly recommended for the handling of resin.
As far as the post-processing of the Strong-X resin, a few simple steps must be followed. First, the 3D printed part has to be cleaned for a maximum of 6 minutes in Liqcreate Resin Cleaner, IPA alcohol or bioethanol, preferably ultrasonic or under agitation. Then the completely dried part has to be cured in a high-power UV curing chamber. The curing workflow is explained in detail by the manufacturer here. It absolutely crucial that the parts are dry before they are cured. The curing of wet or sticky parts will lead to mechanical and surface defects. The drying can be done by simply leaving the cleaned part in a well ventilated area for at least 30 minutes or with the help of pressurized air (2 minutes) for parts cleaned in IPA alcohol or ethanol.
General information | |
---|---|
Manufacturer | Liqcreate |
Technology | DLP//MSLA/SLA |
Material | Photopolymer |
Wavelength | UV 385-405 nm |
Format | 0.25 kg 1 kg |
Color | Opaque grey |
Compatible 3D printers | List of compatible resin 3D printers |
Printing properties | |
Layer height | 25-100 µm |
Layer exposure time | - |
Layer cooling time | - |
Lifting height | - |
Exposure of bottom layers | - |
Number of bottom layers | - |
Curing and washing properties | |
Washing time | 4-5 min (IPA, Liqcreate Resin Cleaner, bioethanol or ultrasonic bath) |
Curing time | Curing settings |
Curing temperature | - |
Mechanical properties | |
Izod impact resistance (ASTM D256A) | 20 J/m |
Charpy impact resistance | - |
Elongation at break (ASTM D638M) | 4-8 % |
Tensile strength (ASTM D638M) | 52-70 MPa |
Tensile modulus (ASTM D638M) | 2900-3200 MPa |
Flexural strength (ASTM D790) | 121-130 MPa |
Flexural modulus (ASTM D790) | 3100-3300 MPa |
Surface hardness (ASTM D2240) | Shore 87D |
Thermal properties | |
Softening temperature | - |
Brightness value | - |
Additional information | |
Service life | - |
HS Code | 2916.1 |
* The typical values listed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the final results and properties with your own tests. For further information please refer to the product data sheet.
125,00 €
111,15 € -5% 117,00 €
199,00 €
92,15 € -5% 97,00 €
44,95 €
199,00 €
43,95 €
100,00 €
58,95 €
399,00 € -5% 420,00 €
299,00 €
128,00 €
249,00 €
135,00 €
124,45 € -5% 131,00 €
337,25 € -5% 355,00 €
169,00 €
399,00 € -5% 420,00 €
156,20 €
268,04 € -5% 282,15 €
240,35 € -5% 253,00 €
214,05 €
418,00 € -5% 440,00 €
96,00 €
280,25 € -5% 295,00 €
123,14 €
110,00 €
139,67 €