> >>Ultracur3D Coat F+ coating
Ultracur3D Coat F+ Pure White View larger

Ultracur3D Coat F+ coating

BASF

New product

240,35 €
240,35 €

-5%

253,00 €

Ask for information

High quality coating for elastic and flexible materials, available in many colors.

Add to wishlist

The coating of flexible and elastic materials can be a challenge if the wrong kind of coating is used. BASF has developed Ultracur3D Coat F+ - the ideal coating for flexible and elastic materials, guaranteeing a great surface finish, excellent adhesion and preserved flexibility and elasticity of the coated material.

The flexibility and elasticity of the Ultracur3D Coat F+

Image 1: The flexibility and elasticity of the Ultracur3D Coat F+. Source: BASF.

The Ultracur3D Coat F+ is a flexible waterborne 2k polyurethane coating than can be used with BASF materials such as the Ultracur3D EL 4000, Ultracur3D EL 60, Ultracur EL 150, Ultracur FL 60 and Ultracur FL 300 through dipping or spraying.

The Light Blue and Grass Green shades of the Ultracur3D Coat F+The Light Blue and Grass Green shades of the Ultracur3D Coat F+The Light Blue, Grass Green and Purple Violet shades of the Ultracur3D Coat F+

Image 2: The Light Blue, Grass Green and Purple Violet shades of the Ultracur3D Coat F+. Source: BASF.

The most outstanding features of the Ultracur3D Coat F+ coating, apart from its great adhesion, elasticity, flexibility, and a wide range of colors to choose from, are its ease of use, low VOC content and the fact that it is safe for contact with skin. Furthermore, TPU parts coated with the Ultracur3D Coat F+ will have an increased abrasion resistance.

A custom made motorbike saddle spray coated with the Jet Black Ultracur3D Coat F+A custom made motorbike saddle spray coated with the Jet Black Ultracur3D Coat F+

Image 3: A custom made motorbike saddle spray coated with the Jet Black Ultracur3D Coat F+. Source: BASF.

The Ultracur3D Coat F+ is the perfect solution for various applications in diverse sectors. It can be used to make functional prototypes as well as end-use serial production parts in many materials and colors, with easy application by dipping or spraying. The example applications are in automotive interiors, footwear, consumer goods, orthopedic models, sport protection equipment, tools, grippers, pipes, etc.

Application Guidelines Coat F+

Download

Before use, the Ultracur3D Coat F+ coating must be stirred thoroughly, and after use, if it contains the Ultracur3D Hardener F+, it should not be poured back into the original packaging.

Before coating, the part to be coated must be clean, free of dust, rust, oil and grease. If the part was previously chemically smoothed, it is recommended to perform an additional tempering of 4h at 60°C before coating. The recommended mixing ratio is 100 : 4 by volume and the coating can be applied via dipping or spraying.

Dip coating is best for medium and large series production with an automatized dipping pool and centrifuge. The downside of dip coating is that small features and holes may not get coated properly. As far as spray coating, this method of coating is recommended for small series production where manual spraying or a spray robot are used. The limitations of spray coating show when the sprayed part has complex geometries such as undercuts or channels.

A quick application guide for dip and spray coating with the Ultracur3D Coat F+ coating

Image 1: A quick application guide for dip and spray coating with the Ultracur3D Coat F+ coating. Source: BASF.

If a spray gun is used, it should always be cleaned beforehand, for example with Isopropanol. The Ultracur3D Coat F+ should be sprayed with a HVLP spray gun in maximum 2 coats with a layer thickness of 20-25 μm.

More detailed application instructions can be found in the Downloads section in the Application guidelines document.

Manufacturer BASF
Quantity 1 kg
Method of application Dipping / spraying
HS Code 3305.3
Danger and cautionary warnings -

Accessories

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)