1
  • $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Black Smartfil ABS

    New product

    23 Items

    16,45 €tax excl.
    19,90 €tax incl.

    Ask for information

    ABS Smartfil is much easier to print than other ABS standards.

    Black Smartfil ABS filament is made in Spain for "Smart Materials 3D" to 3D printers. Black Smartfil ABS filament (1.75mm or 2,85mm) spools are compatible with multiple types of 3D printers. Black Smartfil ABS filament is a plastic whose main features are that is tough, hard and rigid (mechanical strength), with chemical resistance and abrasion. In addition the Black Smartfil ABS (1.75mm or 2,85mm) is additive to reduce the warping effect (appears due to the shrinkage of the plastic as it cools affecting the first layer of the piece off the printer dock) and cracking effect (similar to warping but will affect the intermediate layers causing delamination of the piece).

    Because additives Black Smartfil ABS filament (1.75mm or 2,85mm) is much easier to print than other ABS standards, which have also allowed only necessary to have a temperature of bed 60 versus 80-110 ºC of ABS standards. It is also noteworthy Black Smartfil ABS filament excellent printing stability and regularity.

    This ABS plastic is used in some of everyday objects, such as most plastic boxes, toys or housings many electronic devices. Another important feature of Black Smartfil ABS filament (1.75mm or 2,85mm) is having the ability to absorb water. So if you want to do any container that will contain water, may not be the most suitable material. Unlike the PLA, it is not biodegradable and one of the weaknesses of the ABS is suffering with exposure to UV rays, so that the ASA has emerged as an evolution of ABS materials to alleviate this weakness of ABS.

    The optimum temperature for extrusion Black Smartfil ABS filament (1.75mm or 2,85mm) is around 240 °C, slightly higher than the PLA Smartfil. In the tab usage tips you will find more interesting information to get the best results using this Black Smartfil ABS filament on your 3D printer. The ABS is a polymer composed of three blocks, acrylonitrile, butadiene and styrene by what is called terpolymer. Each of the three blocks provides different characteristics. The acrylonitrile rigidity resistance to chemical attack, toughness and high temperature stability. Butadiene, temperature toughness when it is particularly low, and resistance to impact; and styrene, mechanical strength, stiffness, brightness, hardness. If you are interested in learning more about this material can read more on the link.

    The Black Smartfil ABS filament (1.75mm or 2,85mm)  can be machined, grinding, sanding, boring, paint and glue with extreme ease, maintaining a really good finish. In addition, it is extremely durable and has some flexibility. If you want to achieve extraordinary surface finishes using the coating specifically designed for 3D printing you can find in the accessories category called XTC-3D. ABS is soluble in acetone so many users perform 3D printing vapor bath of acetone to obtain smooth and shiny surface finishes. It is advisable for a proper bed cover 3D printer with Kapton TapeBuildTakDimaFix, Magigoo or with 3DLac  you can find in print accessories store.

    ABS Smartfil_Filament2print

    ABS Smartfil Data Sheet_ES

    Data Sheet ABS Smartfil in Spanish

    Download (2.03M)

    ABS Smartfil Data Sheet_EN

    Data Sheet ABS Smartfil in English

    Download (2.37M)

    ABS SMF Safety Data Sheet_EN

    Safety data sheet ABS Smartfil in English

    Download (410.84k)

    ABS SMF Safety Data Sheet_ES

    Safety Data Sheet in Spanish ABS Smartfil

    Download (451.48k)

    3D printing with filament ABS is a bit more complex than the PLA filament. In the case of Smartfil ABS filament is necessary that the print base is hot about 60 °C, unlike other ABS standards on which this temperature should be between 80 and 110 ºC, so printing ABS Smartfil is really easier. In addition, the extruder temperature should be around 240 °C depending on the color used. Also worth remembering that the ABS plastic undergoes the phenomenon called "warping" which causes the first layer of the pieces off the base of the 3D printer. So if you are printing large pieces it is advisable to use BuildTak, Kapton Tape, DimaFix, Magigoo or 3DLac so that the pieces do not tend to detach from the base.

    It is also advisable to set the "raft", which is to create a first thick layer, such as media, who will not suffer that contraction and on which to print the piece. The disadvantage of using the "raft" is that this first layer will have a less smooth. It is advisable to lower the density of "infill" parameter for the part to store less heat. As for the "brim" (the membrane that is created around the piece) parameter is recommended to set it to never greater thicknesses of 5mm to help the first layer will not peel.

    If you need to print very thin and tall pieces, you'll notice that the ABS plastic doesn´t give you enough time to harden in each recording layer and therefore the piece is as if it had melted. To solve this problem we give a very simple advice, it prints at the same time at least two pieces, and place them separate at the base. Thus while the extruder is moved from one room to another in each recording layer, the plastic will have enough time to harden getting a much better result. As for the interior temperature where printed it is recommended to be controlled and no drafts. Finally remember to use your 3D printer in a well ventilated room as the fumes released during printing filament ABS are not entirely healthy.

    • Plastic Type: ABS
    • Place of manufacture: Spain by "Smart Materials 3D" with the most sophisticated current manufacturing technologies.
    • Color: Black - "True Black"
    • Transparency: Opacity 75%
    • Diameter: 1.75mm or 2,85mm
    • Tolerance (maximum) diameter: ± 0.03mm (1.75mm) and ± 0.05mm (2,85mm)
    • Melting point: 200 ° C
    • Printing recommended temperature: ± 240 ° C
    • Bed temperature based printing: 60-100 ºC
    • Softening Temperature/ Thermal Resistance (ISO 306): 105 ºC
    • Format: Spool of 750gr or spool of 3,3Kg
    • Density (ISO 1183): 1.04 g/cm3
    • Breakage resistance IZOD (ASTM D256): 26 KJ /m2
    • Tensile strength (ASTM D638): 458 Kg / cm2
    • Rockwell surface hardness (ISO 2019-1): 97 MPa
    • Flexural strength (ISO 178): 663 Kg / cm2
    • Diameter coil: Spool of 750gr = 200 mm / Spool 3,3Kg = 270mm
    • Coil width: Spool of 750gr = 70 mm / Spool of 3,3Kg = 150mm
    • Inside hole diameter: Spool of 750gr = 55mm / Spool of 3,3Kg =55mm
    • Shipping Weight: Spool of 750gr = 1.3 Kg / Spool of 3,3Kg = 4.5 Kg
    • HS Code: 3916.9

    5 other products in the same category: