We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

PET support Raise3D

Ref.: RAISE-PET-SUPPORT-NATUR-175-1000

56.00 €

Tax excl.

Diameter

Format

Colour

Quantity

Do you need more than 1 units?
Please, contact us.

In stock 1 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 27 December

Available

Returns

Ask about this product

Raise3D is one of the leading manufacturers of FDM 3D printers and accessories today, committed to offering high quality 3D printers with innovative components and operating systems, while maintaining a price point that is suitable for most professional users. In addition to printing equipment, Raise3D develops optimised technical materials for its equipment, as well as support materials so that users can manufacture complex, high quality parts.

Raise3D PET Support filament is a break-away support material specially developed for use in combination with the Raise3D industrial fiber reinforced filaments PET CF and PET GF. When combined with these materials, PET Support can help create parts with large overhangs or cavities.

Part printed with PET GF (orange) and the PET support filament

Image 1: Part printed with PET GF (orange) and the PET Support filament. Source: Raise3D.

The support structures made with PET Support are much easier to remove than support printed with the main material, and leave a smooth and clean part once removed, helping achieve parts with a detailed surface quality and dimensional accuracy.

Thanks to the lower moisture absorption and an attractive performance-cost ratio, the PET Support filament is an excellent alternative to support materials such as BVOH or PVA. Even though the PET Support filament can be used with other CF and GF filaments by Raise3D, it is highly recommended to use it in combination with PET CF and PET GF for best results.

General information
Material	PA
Format	1 kg
Density	1.16 g/cm³
Filament diameter	1.75 mm
Filament tolerance	- mm
Filament length	± 358.4 m

Printing properties
Printing temperature	260 - 300 ºC
Print bed temperature	60 - 80 ºC
Chamber temperature	-
Cooling fan	✓
Recommended printing speed	35 - 120 mm/s

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Softening temperature	- ºC

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

Raise3D PET Support filament has a high compatibility with Raise3D PET CF and PET GF industrial filaments. As for other fibre-reinforced filaments, compatibility depends on the geometry of the 3D printed part.

PET Support is sensitive to moisture and should be stored and used under dry conditions (surrounding humidity below 15 %). It is highly recommended to dry PET Support at 70-80 °C for 8-12 hours before printing in a filament dryer.

The PET Support filament should be extruded at 260-300 ºC on a bed heated to 60-80 ºC. The printing speed range for this material is 35-120 mm/s abd it is recommended to have the layer fan turned on.