Aquasys 180
search
  • Aquasys 180
  • Aquasys 180
You must be logged in to manage your wishlist.

Aquasys 180

INFINITE-AQUASYS-180-175-500
200.00 € 200.00 €
Tax excl.
Diameter
Format
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 0 - 0 days
Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Infinite Material Solutions is an American company specialising in the development of innovative materials for FFF 3D printing. Unlike other manufacturers, Infinite Material Solutions only includes in its catalogue materials that are unique in the market and that provide added value over other available alternatives.

With this philosophy in mind, they have developed the Aquasys range, two water-soluble support materials that together have the highest compatibility on the market.

Video 1: Aquasys soluble support materials. Source: Infinite Material Solutions.

AQUASYS 180 is the first water-soluble support material compatible with advanced high temperature materials. It is similar to AQUASYS 120, but optimised to withstand printing temperatures of up to 300°C, and base and chamber temperatures of up to 180°C.

A part 3D printed with the Aquasys 180 support material

Image 1: A part 3D printed with the Aquasys 180 support material. Source: Infinite Material Solutions.

Thanks to this exceptional thermal stability, it can be used as a support material with the most advanced materials available in FFF 3D printing, such as PEEK, PEKKULTEM or PPSU, in addition to most AQUASYS 120 compatible materials.

Like AQUASYS 120, it is hydrophilic, biocompatible, biodegradable, non-toxic and non-carcinogenic. And like AQUASYS 120, its residues do not pose any environmental risk either.

AQUASYS 180 is one of the most user-friendly and thermally stable support materials compatible with advanced materials.

General information

Material PVA/BVOH
Format 500g
Density - g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance - mm
Filament length -

Printing properties

Printing temperature 300 ºC
Print bed temperature 180 ºC
Chamber temperature 180 ºC
Cooling fan -
Recommended printing speed - mm/s

Mechanical properties

Elongation at break - %
Tensile strength - MPa
Tensile modulus - MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness -

Thermal properties

Softening temperature - ºC

Specific properties

Transparency -

Other

HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 53 mm
Spool width 70 mm

AQUASYS 180 is highly hygroscopic, so it should be stored in an airtight container with desiccant and the use of a device such as Printdry II is recommended during printing. In case it picks up excess moisture, it can be dried at 85 °C for 8h.

It can be dissolved directly in tap water at any temperature, however, the maximum solubilisation rate is reached at 80 ºC.
Although it can withstand printing temperatures up to 300°C, it is recommended to print in the 240 - 260°C range.

Featured properties

Printing temperature
300 ºC
Filament diameter
1.75 / 2.85 mm

Related products