- -15%

Designed for 3D printing enthusiasts who prioritize quality, simplicity, and environmental responsibility, The Filament's PLA filament is manufactured in Europe. It combines reliability and functionality, making it ideal for everyday 3D printing applications. Available in a wide range of vibrant colors, it supports various creative and technical projects. For users of devices like the Bambu Lab AMS multimaterial system, this PLA filament is a perfect choice as it is fully compatible with such devices. Additionally, this PLA is also offered in a convenient Refill format.
PLA (Polylactic Acid) is a biodegradable thermoplastic derived from renewable resources such as corn starch or sugarcane. It stands out for its low deformation, ease of printing, and its ecological character, making it one of the most popular materials in the 3D printing industry. Its excellent dimensional stability and smooth surface finish are ideal for both functional and decorative applications.
The Filament's PLA filament is easy to work with, with a recommended printing temperature of 185-215 ºC and a heated printing bed between 40-50 ºC. Printing speeds between 40-150 mm/s ensure flexibility in project execution.
In conclusion, The Filament PLA is designed to offer a simple and effective 3D printing experience, notable for:
These features make it the perfect choice for different users:
For more advanced applications, such as needing high-speed PLA, The Filament offers other alternatives within its range of filaments like PLA HS from The Filament. Additionally, no heated build chamber is required, making it suitable for a variety of 3D printing setups.
You can find more information about this filament and its refill option by checking out the article dedicated to it on our blog.
General information |
|
Material | PLA |
Format | 1 kg |
Density | 1.24 g/cm³ |
Filament diameter | 1.75 mm |
Filament tolerance | ± 0.03 mm |
Filament length | ± 335.3 m |
Printing properties |
|
Printing temperature | 185-215 ºC |
Print bed temperature | 40-50 ºC |
Chamber temperature | ✗ |
Cooling fan | ✓ |
Recommended printing speed | 40-150 mm/s |
Mechanical properties |
|
Elongation at break | (D 882) 5 % |
Tensile strength | (D 882) 58 MPa |
Tensile modulus | (D 882) 3200 MPa |
Flexural strength | - MPa |
Flexural modulus | - MPa |
Surface hardness | - |
Thermal properties |
|
Softening temperature | (E 2092) 55 ºC |
Specific properties |
|
Transparency | ✗ |
Other |
|
HS Code | 3916.9 |
Spool diameter (outer) | 200 mm |
Spool diameter (inner hole) | 52 mm |
Spool width | 67 mm |
Like any 3D printing filament, the The Filament filaments should be stored properly in order to avoid their deterioration and, in consequence, extrusion problems and inferior print quality. The spool can be stored in an airtight plastic bag, in a resealable bag with a desiccant capsule, or in a smart filament container. If the filament has absorbed too much moisture, it must be dried before printing in a filament dryer at 40-50 ºC for about 6 hours.
Material | Nozzle temperature | Bed temperature | Heated chamber | Printing speed | Hardened nozzle | Cooling fan | |
---|---|---|---|---|---|---|---|
Standard | High speed | ||||||
PLA (Refill) | 185-215 ºC | ✗ | 40-50 ºC | ✗ | 40-150 mm/s | ✗ | Up to 100 % |
PLA HS (Refill) | 190-220 ºC | ✓ | 40-55 ºC | ✗ | 40 - 600 mm/s | ✗ | Up to 100 % |
PLA CF (Refill) | 200-300 ºC | ✗ | 35-45 ºC | ✗ | 40-150 mm/s | ✓ | Up to 100 % |
PETG (Refill) | 230-255 ºC | ✗ | 60-75 ºC | ✗ | 40-150 mm/s | ✗ | 75-100 % |
PETG CF (Refill) | 240-265 ºC | ✗ | 60-70 ºC | ✗ | 40-150 mm/s | ✓ | 75-100 % |
In order to ensure smooth printing and optimal part quality, the filaments from the The Filament line should be printed in accordance with the settings recommended by the manufacturer in the filaments' technical datasheets.
The filaments from the The Filament line are characterized by ease of printing and great adhesion. Nevertheless, if increased adhesion is needed to prevent warping, adhesion products such as Magigoo, 3DLac or Dimafix are recommended.
The PLA CF and PETG CF filaments contain abrasive carbon fibers. This is why it is best to print these materials with a hardened nozzle with a diameter of minimum 0.4 mm to avoid clogging and excessive nozzle wear, and to obtain high quality parts.
The filaments that come in Refill format are wound onto an eco-friendly cardboard core which makes them compatible with BambuLab reusable spools. Apart from that, the Refill format is compatible with the Spectrum Refill spools, as well as other adjustable spool holders.