PLA XRS
search
Compare
You must be logged in to manage your wishlist.

PLA XRS

NANOVIA-PLAXRS-175-500
43.50 € 43.50 €
Tax excl.
Diameter
Format
Quantity

In stock 5 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 16 September
Available

Nanovia is a renowned French manufacturer of filaments and products for 3D printing specialised in offering technical products.

PLA XRS is a PLA-based filament that enables 3D printing of X-ray shielded parts.

PLA is a biodegradable polymer. This material is one of the most widely used in 3D printing thanks to its properties and ease of printing:

  • It does not require a hot bed.
  • It has hardly any warping effect.

As it has a PLA base, PLA XRS Nanovia maintains many of the properties of this material, such as ease of printing. Thus, this filament can be printed on almost any FDM 3D printer on the market.

PLA XRS

Image 1: Piece printed with PLA XRS. Source: Nanovia.

Undoubtedly, the most representative property of this filament is its X-ray shielding effect. PLA XRS enables the 3D printing of radio-opaque parts without the use of lead or any other toxic material.

This shielding effect varies depending on the wall thickness of the printed parts and the configuration of the 3D printer.

This material is not suitable for use in medical or dental implants.

General information
Material PLA
Format 50 g / 500 g
Density 1.66 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance ± 0.05 mm
Filament length (Ø 1.75 mm - 0.5 Kg) ± 152 m / (Ø 2.85 mm - 0.5 Kg) ± 47 m

Printing properties
Printing temperature 210 - 240 ºC
Print bed temperature 20 - 60 ºC
Chamber temperature ✗
Cooling fan ✓
Recommended printing speed 50 - 70 mm/s

Mechanical properties
Charpy impact strength (ISO 179) 1.8 KJ/m²
Elongation at break (ISO 527) 3.5 %
Tensile strength - MPa
Tensile modulus (ISO 527) 3500 MPa
Flexural strength - MPa
Flexural modulus (ISO 178) 8800 MPa
Surface hardness -

Thermal properties
Softening temperature (ISO 306) 60 ºC

Specific properties
Transparency ✗

Other
HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 52 mm
Spool width 55 mm

As it is a PLA-based material, it does not require the use of a hot bed. In case it is available, it is recommended to use it at 40 - 60 ºC to improve the adherence to the printing base.

This filament is composed of hygroscopic material. Therefore, it is recommended to store the spool in a dry place and, if possible, with desiccant bags. If moisture is absorbed, we recommend using a device such as Print Dry Pro to dry the filament.

It is recommended to use standard safety equipment during post-processing of parts printed with Nanovia PLA XRS.

It should be noted that Nanovia XRS material is not intended for use in medical and dental implants.

Featured properties

Printing temperature
210 - 240 ºC
Filament diameter
1.75 / 2.85 mm
Density
1,66 g/cm³

Related products