Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

Innovatefil PETG FP

Ref.: PETG-FP-SMF-175-750

37.56 €

Tax excl.

Diameter

Format

Quantity

In stock 3 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Friday 22 November

Available

Returns

Ask about this product

Smart materials is a Spanish manufacturer dedicated to the development and production of filaments for 3D printing, which has an extensive range of excellent quality products.

INNOVATEFIL® PETG FP filament is composed of modified Copolyester Glycol with flame retardant additives based on halogens and red phosphorus.

PETG is a thermoplastic copolyester (extruded polyethylene terephthalate glycol copolyester). Unlike PET filaments, it does not crystallise on heating and therefore has high toughness and flexibility in addition to its good chemical resistance and transparency.

Filaments made from PETG are a modified version of the simpler PET, a non-toxic thermoplastic polymer used in the manufacture of clothing and products such as containers. PETG filaments are a good alternative to any ABS or Nylon, due to their low melting temperature and durability.

PETG FP filament is flame retardant, slowing the spread of fire because it does not ignite as easily as other plastics. With this filament it is unlikely that a fire would start in the event of a bad contact, electrical failure or contact with a heat source.

Piezas impresas con PETG FP

Image 1: Parts printed with PETG FP filament. Source: Smart Materials

This filament is ideal for manufacturing flame retardant, soft and resistant objects. In addition, PETG FP meets the UL 94 standard that determines the tendency of materials to extinguish or spread the flame once a fire has been generated.

General information
Material	PETG
Format	0.75 kg
Density	1.26 g/cm³
Filament diameter	1.75 / 2.85 mm
Filament tolerance	- mm
Filament length	-

Mechanical properties
Elongation at break	(ISO 527) 40 %
Tensile strength	(ISO 527) 40 MPa
Tensile modulus	(ISO 527) 2350 MPa
Flexural strength	55 MPa
Flexural modulus	1500 MPa
Surface hardness	-
Impact strength	5 KJ/m²

Printing properties
Printing temperature	235 - 260 ºC
Print bed temperature	40 - 80 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	35 - 50 mm/s

Thermal properties
Softening temperature	(ISO 306) 70 ºC

Specific properties
Chemical resistance	✓

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

It should be noted that this filament is a hygroscopic material, so it is recommended to keep PETG FP stored in a dry environment, inside an airtight bag, or to use desiccant bags to keep it free from moisture.

Another option is to store it inside the PrintDry drying machine or the Fiber Three Safe case to avoid moisture.