FIREPROOF ABS
search
You must be logged in to manage your wishlist.

FIREPROOF ABS

ABS-FP-SMF-175-750
22.70 € 22.70 €
Tax excl.
Diameter
Format
Quantity

In stock 23 units available for immediate shipping.
units available for shipping in 0 - 0 days
Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 10 October

Fireproof ABS filament is a fireproof material tested according to UL94 and IEC 60695-11-10. It is ideal for coating elements that may pose a fire source material.

All typical plastics have low flame resistance, hence arose the ABS Smartfil FIREPROOF which is a flame retardant or self-extinguishing in order to provide high levels of security in the environments of both daily life or work as technical parts. FIREPROOF ABS is an additive ABS to delay the spread of fire and extinguishing finish without producing plastic drip.

Underwriters Laboratories (UL) is an independent organization that provides testing and product safety testing and certification. His UL94 test and qualification procedures for determining the flammability of thermoplastic are generally accepted standard in virtually everyone.

This test measures the burning time of a sample of polymer fixed vertically (the thickness specified in the test) after they have made contact with the flame of a Bunsen burner for 10 seconds. The V0, V1 and V2 tests determine the degree of self-extinguishing polymer.

UL94 vertical burning material is classified as V0 when the fire is extinguished in 10 seconds without dripping, as V1 when the fire is extinguished in 30 seconds without dripping and V2 when the fire is extinguished in 30 seconds with dripping.

Safety tests carried out in the presence of fire with Fireproof ABS filament with a piece of wall thickness of 1.5mm are able to extinguish the flame in less than 30 seconds without producing plastic drip so it would match the category V1 according to UL94. Tests with pieces of Fireproof ABS with 2.1mm thick or greater are capable of self-extinguishing the flame in less than 10 seconds without causing dripping of plastic material, which corresponds to the category V0 according to UL94.

Therefore, the ABS FIREPROOF is ideal for coatings or covers to protect such electrical circuits or any risk of generating element fires.

In short, this FIREPROOF ABS filament can be eligible for the highest category of self-extinguishing according to UL94 as long as the thicknesses are more than 2.1mm.

In addition the ABS FIREPROOF is additive to reduce the effect warping and cracking. The warping effect occurs due to the shrinkage of the plastic as it cools affecting the first layer of the piece off of the printer dock. cracking and warping effect is similar to but in the intermediate layers.

General information

Material ABS
Format 50 g / 750 g
Density (ASTM D792) 1.17 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance (Ø1.75 mm) ± 0.05 mm / (Ø2.85 mm) ± 0.03 mm
Filament length (Ø1.75 mm - 0.75 Kg) ± 266 m / (Ø2.85 mm - 0.75 Kg) ± 100 m

Printing properties

Printing temperature 210 - 230 ºC
Print bed temperature 80 - 100 ºC
Chamber temperature
Cooling fan
Recommended printing speed - mm/s

Mechanical properties

Izod impact strength (ISO 180) 23 KJ/m²
Charpy impact strength (ISO 179) 24 KJ/m²
Elongation at break - %
Tensile strength (ISO 527) 38 MPa
Tensile modulus - MPa
Flexural strength (ISO 178) 56 MPa
Flexural modulus (ISO 178) 180 MPa
Surface hardness Rockwell 101

Thermal properties

Melting temperature 200 ºC
Softening temperature (ISO 306) 93 ºC

Specific properties

Transparency 25 %
Flammability classification UL94 V1 @ 1.5 mm / V2 @ 2.1 mm

Other

HS Code 3916.9
Spool diameter (outer) 200 mm
Spool diameter (inner hole) 55 mm
Spool width 70 mm

3D printing with filament ABS FIREPROOF is a bit more complex than the PLA filament. In the case of ABS FIREPROOF filament is necessary that the print base is hot between 80 and 100 ºC, so printing ABS Smartfil is really easier. Also worth remembering that the ABS plastic undergoes the phenomenon called "warping" which causes the first layer of the pieces off the base of the 3D printer. So if you are printing large pieces it is advisable to use Magigoo, BuildTak, Kapton Tape, DimaFix or 3DLac so that the pieces do not tend to detach from the base.

It is also advisable to set the "raft", which is to create a first thick layer, such as media, who will not suffer that contraction and on which to print the piece. The disadvantage of using the "raft" is that this first layer will have a less smooth. It is advisable to lower the density of "infill" parameter for the part to store less heat. As for the "brim" (the membrane that is created around the piece) parameter is recommended to set it to never greater thicknesses of 5mm to help the first layer will not peel.

If you need to print very thin and tall pieces, you'll notice that the ABS FIREPROOF plastic doesn´t give you enough time to harden in each recording layer and therefore the piece is as if it had melted. To solve this problem we give a very simple advice, it prints at the same time at least two pieces, and place them separate at the base. Thus while the extruder is moved from one room to another in each recording layer, the plastic will have enough time to harden getting a much better result. As for the interior temperature where printed it is recommended to be controlled and no drafts. Finally remember to use your 3D printer in a well ventilated room as the fumes released during printing filament ABS are not entirely healthy.

Featured properties

Printing temperature
210 - 230 ºC
Filament diameter
1.75 / 2.85 mm
Density
1,17 g/cm³

Related products