• -10%
CPE CF112 Carbon
search
Compare
You must be logged in to manage your wishlist.

CPE CF112 Carbon

CPE-CF112-175-600
44.21 €
-10%
39.79 € 39.79 €
Tax excl.
Diameter
Format
Quantity

In stock 11 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Monday 18 November
Available

The CPE CF112 is a thermoplastic copolyester reinforced with carbon fibers. It stands out especially for its great durability and resistance to wear, for its great hardness (comparable to Vinyl 303) and high resistance to chemical agents.

The pieces obtained with the CPE CF112 filament will have a smooth and matte finish and mechanical properties similar or even superior to ABS, but with the ease of printing similar to that of the PLA, with excellent adhesion between layers and low deformation. It has abrasive properties, so it is recommended to use hardened steel nozzles.

CPE CF112 Carbon

Image 1: Piece printed with CPE CF112 Carbon. Source: Fillamentum

The CFE121 CPE experiences low shrinkage, making it very easy to create 3D prints with large surfaces and easily adheres to acrylic, glass, BuildTak, BuildTak FlexPlate platforms, etc., so the warping effect is virtually nil. It does not present moisture absorption problems, since the CPE CF112 locates the moisture on the surface of the piece so that it does not need to be subjected to drying processes after printing.

Its properties make the CPE CF112 an ideal filament for applications that must resist to long-term load, as well as to be used in the production of electronic equipment. Its use is not recommended for applications in contact with food. It is a recyclable, biologically based material that does not contain restricted substances and BPA free. It is also an excellent option for functional prototypes of any application on which to perform strength and utility tests that basic filaments such as PLA and ABS would not allow.

General information
Material PET
Format 50 g / 600 g
Density 1.16 g/cm³
Filament diameter 1.75 / 2.85 mm
Filament tolerance ± 0.1 mm
Filament length (Ø 1.75 mm) ± 215 / (Ø 2.85 mm) ± 81

Printing properties
Printing temperature 250 - 270 ºC
Print bed temperature 70 - 85 ºC
Chamber temperature -
Cooling fan 0 - 15 %
Recommended printing speed 20 - 40 mm/s

Mechanical properties
Charpy impact strength (ISO 179) 105.9 KJ/m²
Elongation at break (ISO 527) 8 %
Tensile strength (ISO 527) 37.7 MPa
Tensile modulus (ISO 527) 2200 MPa
Flexural strength - MPa
Flexural modulus - MPa
Surface hardness (ISO 7619) Shore 77D

Specific properties
Chemical resistance ✓
General information
Manufacturer Fillamentum (Czech Republic)
Material CPE (Thermoplastic chlorinated polyethylene) with carbon fiber
Format Pack of 50 g
Spool of 600 g
Density 1.16 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0.1 mm
Filament length ±215 m (Ø 1.75 mm) 
±81 m (Ø 2.85 mm) 
Color Black
RAL/Pantone -
Print settings
Printing temperature 255-275 ºC
Print bed temperature 70-85 ºC
Chamber temperature Not necessary
Cooling fan Not recommended (max. 15%)
Recommended printing speed 20-40 mm/s
Mechanical properties
Izod impact strength  -
Charpy impact strength (ISO 179) 105,9 kJ/m2
Elongation at break (ISO 527) 8 %
Tensile strength  -
Tensile Modulus -
Flexural strength (ISO 527) 52.4 MPa
Flexural modulus (ISO 527) 2200 MPa
Surface hardness (ISO 7619) 77 Shore D
Thermal properties
Softening temperature 80 ºC
Melting temperature -
Specific properties
Transparency  No
FDA certification No
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm
Diameter coil (inner hole) 55 mm 
Coil Width 50 mm 


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

General information
Manufacturer Fillamentum (Czech Republic)
Material CPE (Thermoplastic chlorinated polyethylene) with carbon fiber
Format Pack of 50 g
Spool of 600 g
Density 1.16 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0.1 mm
Filament length ±215 m (Ø 1.75 mm) 
±81 m (Ø 2.85 mm) 
Color Black
RAL/Pantone -
Print settings
Printing temperature 255-275 ºC
Print bed temperature 70-85 ºC
Chamber temperature Not necessary
Cooling fan Not recommended (max. 15%)
Recommended printing speed 20-40 mm/s
Mechanical properties
Izod impact strength  -
Charpy impact strength (ISO 179) 105,9 kJ/m2
Elongation at break (ISO 527) 8 %
Tensile strength  -
Tensile Modulus -
Flexural strength (ISO 527) 52.4 MPa
Flexural modulus (ISO 527) 2200 MPa
Surface hardness (ISO 7619) 77 Shore D
Thermal properties
Softening temperature 80 ºC
Melting temperature -
Specific properties
Transparency  No
FDA certification No
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm
Diameter coil (inner hole) 55 mm 
Coil Width 50 mm 


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

Featured properties

Printing temperature
250 - 270 ºC
Filament diameter
1.75 / 2.85 mm
Density
1,16 g/cm³

Related products