search
Compare
You must be logged in to manage your wishlist.

Hotend High Flow ObXidian for Bambu Lab X1/P1 Series

E3D-HF-OBX-BAMBU-040
92.52 € 92.52 €
Tax excl.
Diameter Nozzle
Quantity

In stock 2 units available for immediate shipping.
units available for shipping in 4 - 8 days Available for shipment within 4 - 8 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Tuesday 9 December

The High Flow ObXidian hotend is the fruit of a collaboration between the renowned brands E3D and Bambu Lab and it was designed specially for the Bambu Lab 3D printers from the X1 and P1 series. The High Flow ObXidian hotend is one of the most compact, lightweight, and high-performing hotends available, boasting a maximum printing temperature of 300 ºC and available in diameters of 0.4 mm or 0.6 mm.

The E3D High Flow ObXidian hotend for the Bambu Lab X1/P1 series

Image 1: The E3D High Flow ObXidian hotend for the Bambu Lab X1/P1 series. Source: E3D.

Constructed for efficiency, the High Flow ObXidian hotends are tailored to amplify the performance of the Bambu Lab X1 and X1 Carbon, X1E, P1S and P1P printers. This is achieved thanks to E3D's High Flow technology to maximize the volumetric flow rate by an astounding 60 %. The seamless extrusion at increased speeds capitalizes on the full potential of the Bambu Lab printers' motion system.

The High Flow ObXidian hotend is characterized by smoothness and durability. The proprietary E3DLC coating applied to the nozzle and heater components not only enhances resistance against abrasive materials used in fiber-filled filaments but also provides a non-stick layer, preventing plastic build-up and ensuring consistent, hassle-free printing experiences. The High Flow ObXidian hotend can be used with fibre filled filaments, glow in the dark and glitter filled filaments but it should be kept in mind that prolonged use of metal and ceramic filled filaments will cause increased wear.

Video 1: Bambu E3D High Flow ObXidian speed challenge. Source: E3D.

Retaining the same form factor as the stock Bambu hotend, the High Flow ObXidian hotend facilitates a swift installation (video tutorials can be found in the Usage Tips section). The temperature sensor and heater pads can be reused without the need for mount or part cooling adjustments. The package contains all the components essential for installing this upgrade: the High Flow ObXidian hotend (0.40 mm or 0.60 mm), thermal grease for enhanced heat conduction, a Bambu Lab silicone sock, a heater retaining spring, and two Bambu Lab bolts.

General information
Manufacturer E3D
Filament diameter 1.75 mm
Nozzle diameter 0.4 mm / 0.60 mm

Printing properties
Maximum temperature 300 ºC

Other
HS Code 8477.9
Manufacturer E3D
Type -
Filament Diameter 1.75 mm
Included Nozzle Diameter 0.4 mm / 0.60 mm
Maximum Printing Temperature 300 ºC
Voltage -
Kit Contents 1 x Bamboo Lab High Flow ObXidian HotEnd 0.40mm or 0.60mm
1 x Thermal Grease
1 x Bambu Lab Sock
1 x Bambu Lab Heater Retention Spring
2 x Bambu Lab Screws
HS Code 8477.9

Related products

You must be logged in to manage your wishlist.

  • New
High Flow ObXidian HotEnd...

High Flow ObXidian HotEnd for Bambu Lab A1 and A1 Mini with max extrusion, abrasion resistance and professional 3D results.
63.46 € 63.46 €
Quick view