xESD resin Nexa 3D 1.5 kg
search
  • xESD resin Nexa 3D 1.5 kg
  • xESD resin Nexa 3D 5 kg
Compare
You must be logged in to manage your wishlist.

xESD resin Nexa 3D

RS-NEXA-XESD-1500
639.00 € 639.00 €
Tax excl.
Format
Quantity

In stock 0 units available for immediate shipping.
units available for shipping in 5 - 9 days Available for shipment within 5 - 9 days

Product temporarily out of stock with these characteristics. Select another combination.

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Wednesday 23 October - Tuesday 29 October
Available

The xESD resin from the Nexa 3D family of functional materials is a black rigid material with static-dissipative properties. The xESD resin is made of a rigid urethane dimethacrylate base with uniformly dispersed discrete carbon nanotubes.

Video 1: The electrostatically dissipative xESD resin by Nexa 3D. Source: Nexa 3D.

Parts 3D printed with the xESD resin do not mark, and their isotropic static dissipative performance is combined with improved tensile strength, tensile modulus and impact resistance thanks to the addition of carbon.

The carbon nanotubes technology

Image 1: The carbon nanotubes technology. Source: Nexa 3D.

The xESD resin was designed especially for the Nexa 3D ultrafast resin 3D printers, including the XiP 4K printer. The patented Nexa 3D LSPc technology allows for the fabrication of high resolution dissipative parts in a matter of a few hours.

An ESD-safe enclosure 3D printed with the xESD resin

Image 2: An ESD-safe enclosure 3D printed with the xESD resin. Source: Nexa 3D.

Numerous industries where electrostatic discharge poses a threat, especially the electronic industry, can benefit from the advantages offered by the Nexa 3D xESD resin. It is a perfect material for the 3D printing of ESD-safe jigs, fixtures, grippers, assembly aids and enclosures, and thus protecting high value electronic components from ESD damage.

Curing, washing, and sintering properties
Washing time -
Curing time -
Curing temperature - ºC

General information
Manufacturer Nexa 3D
Material Photopolymer
Format 1 kg / 5 kg
Technology LED / LCD
Wavelength - nm
Compatible 3D printers Nexa 3D
Viscosity @ 25 ºC: 878.1 cP
Density (solid) @ 25 ºC: 1.1 g/cm³

Printing properties
Layer height - µm
Layer exposure time -
Layer off time -
Lifting height - mm
Bottom layer exposure -
Bottom layer count -

Mechanical properties
Izod impact strength - KJ/m²
Charpy impact strength - KJ/m²
Elongation at break (ASTM D638) 3.8 %
Tensile strength (ASTM D638) 68.1 MPa
Tensile modulus (ASTM D638) 2600 MPa
Flexural strength (ASTM D790) 97.4 MPa
Flexural modulus (ASTM D790) 1800 MPa
Surface hardness (ASTM D2240) Shore 87 D

Electrical properties
Surface electrical resistivity (ASTM D257) 10⁷ Ohm

Thermal properties
Softening temperature (ASTM D648) @ 0.45 MPa: 91.3 ºC
Heat deflexion temperature (ASTM D 648-16) @ 0.45 MPa: 91.3 ºC / @ 1.8 MPa: 91.4 ºC

Specific properties
Maximum water absorption (ASTM D 570-98) 0.9 %

Other
HS Code 2916.1
Lifetime (since manufacturing) - M

Certain precautions must be taken when working with 3D printing resins. The user must ensure that the working space is adequately ventilated, and that protective goggles, gloves and garments are worn at all times. The xESD resin should be stored in a tightly closed container/resin vat to avoid resin deterioration due to UV exposure. The container/vat should be kept in a cool, well ventilated area away from heat, sparks and open flame.

Parts 3D printed with the Nexa 3D xESD resin will achieve their specific properties only after being subjected to post-processing by washing and curing. If applicable, the support structures must be removed from the part before curing and the part must be washed. Nexa3D recommends 2 wash intervals (2 minutes each) in IPA alcohol or xClean. It is recommended to use two buckets in the cleaning process, especially when working with multiple resin colors, to prevent resin residue from sticking to the part.

Once washed, the parts 3D printed with the xESD resin must be dried and then cured either with the help of an LED or wide spectrum lamp, or in the Nexa 3D Wash+Cure station developed especially for the washing and curing of parts 3D printed on the XiP 3D printer. The recommended washing, drying and curing times can be consulted on the manufacturer's website for each Nexa 3D resin.

More information on how to print and post-process the Nexa 3D resins can be found here.

Featured properties

Technology
LED / LCD

Related products