Find the most suitable 3D printer for your needs.
We guide you to find the best option according to your needs.
Find the most suitable 3D scanner for your needs.
Contact us and we'll get it for you.
Find the most suitable filament for each application.
Find the most suitable resin for each application.
Find the most suitable powder for each application.
Find the most suitable pellets for each application.
Find the accessory you need for your 3D printer.
Find the ideal accessories for your 3D prints.
Do you need more than 0 units? Please, contact us.
Product temporarily out of stock with these characteristics. Select another combination.
We notify you when it will be available:
Ultracur3D® DMD 1005
BASF is a German manufacturer specialising in the development of chemical products. Its product range includes products for the production of 3D printing materials for FDM, resin and SLS. These products fall under the well-known Ultrafuse, Ultracure and Ultrasint brands.
Ultracur3D® DMD 1005 resin is a resin intended for daylight resin technology, i.e. for use in visible light printers such as Photocentric brand printers. Daylight is a lower energy, longer wavelength light that ensures more reliable polymerisation than UV light.
This brand, Photocentric, has teamed up with BASF to create a range of Engineering Plastic Daylight (EPD) materials for a wide range of applications.
The daylight dental resin, currently available in beige, is ideal for the creation of dental models and moulds that can be achieved at low cost, with high precision and thermoformability.
Before starting a print, the resin should be shaken well and, if possible, vacuumed to remove any bubbles that may have formed.
Once printed, the pieces should be cleaned with isopropyl alcohol. To do this it is advisable to immerse the pieces in a container with isopropyl alcohol and place this container in an ultrasonic cleaner for 4 minutes. It is recommended not to immerse the piece for long periods of time to avoid deformation and softening.
After cleaning, the pieces should be dried for 30 minutes at 40 ºC. Once dry, parts printed with BASF Ultracur3D resins should be cured at room temperature to obtain optimum properties. Curing conditions will depend on the characteristics of the printer used and the curing equipment.
All customers who have purchased any resin from the BASF Ultracur3D range can request the appropriate user guide. This can be done using the contact form by selecting "Technical Support" in the subject line and the order number of the resin.
Daylight technology resin ideal for the manufacture of dental models and moulds.