

All users of 3D printing who have tried to make parts with PP know that it is a material very prone to detach from the base, especially at the corners (warping effect). But, this problem has finally been solved thanks to the PP printing foil, PP base of adhesion for PPprint.
The printing surface of PPprint is presented as an alternative to the specific glues for polypropylene, such Smart Stick or Magigoo PP. This printing base allows to make large pieces without the usual problem, the warping effect. This effect causes the corners of the piece to be detached from the base by internal contractions of the material, due to the change in temperature during printing. The base of adherencia for PP, base formed mainly by PP, offers his greater power of adherencia when warming up to 60ºC.
The PPprint base for PP adhesion includes a double-sided adhesive sheet, ideal for adhering the PP sheet to any type of printing base. To use it, it is absolutely necessary to use the metal roller, a really useful element for the installation of the printing base and which is also essential to ensure that the adhesion base for PP is completely smooth, free of irregularities and ready to print PP filament about her.
It is recommended to use the base PP of PPprint at the time of printing with any filament of polypropylene (PP) as it is a sheet that is installed easily and ensures that the pieces made on it are free of deformations .
General information |
|
Manufacturer | PPprint |
Print bed temperature | 60 ºC |
Dimensions and weight |
|
Dimensions | Prusa Mk3s Plus: 203 x 203 mm; 254 x 228 mm / Raise3D Pro2: 304 x 304 mm / Raise3D E2: 330 x 240 mm |
Other |
|
HS Code | 3506.9 |
Other information | |
Package Contents (Adhesion Base for PP)
Package Contents (Metal Roller)
|
For the installation of the adhesion base for PP, the following steps must be followed:
It is recommended to use a base temperature of 50-70ºC to obtain the maximum possible adhesion power.
The adhesion base for PP can also be used to print PLA.