We will remain closed until January 1st due to the Christmas holidays. Orders received until Thursday, December 26th will be shipped on Friday, December 27th. Orders received from Friday, December 27th will be shipped on January 2nd. Happy Holidays!

Display Nav Left

Language:

Compare

You must be logged in to manage your wishlist.

FEco Graphene - Colfeed4Print

Ref.: COLFEED-FECO-GRAP.15-175-10M

250.00 €

Tax excl.

Diameter

Format

Version

Quantity

Do you need more than 1 units?
Please, contact us.

In stock 1 units available for immediate shipping.
units available for shipping in 0 - 0 days Available for shipment within 0 - 0 days

Product temporarily out of stock with these characteristics. Select another combination.

We notify you when it will be available:

Approximate delivery date: Thursday 26 December

Available

Returns

Ask about this product

Colfeed4Print's FEco family of materials includes the FEco Graphene, a composite filament with a PLA base and inorganic content in the form of 15% of conductive graphene particles with a mean diameter of 503 nm. Parts 3D printed with this filament have an electrical conductivity of 1000 S/m and can be UV-sterilized. The method of colloidal preparation employed for the feedstock facilitates achieving a significant level of dispersion for graphene particles within the polymer matrix. This filament is well-suited for situations requiring reinforced materials. Moreover, the graphene possesses unique properties, making it suitable for use as an electrode substrate.

Parts 3D printed with the FEco Graphene filament

Image 1: Parts 3D printed with the FEco Graphene filament. Source: Colfeed4Print.

Graphene is widely recognized for its exceptional conductivity, making it a highly sought-after material for various conductive applications. Due to its unique atomic structure, graphene exhibits outstanding electrical conductivity, surpassing traditional materials like copper and silicon. It is employed in diverse fields, including electronics, energy storage, and sensors, where its remarkable conductivity enables efficient transmission of electrical signals and facilitates the development of advanced electronic devices and high-performance batteries.

Cross-section of the FEco Graphene filament

Image 2: Cross-section of the FEco Graphene filament. Source: Colfeed4Print.

For optimal printing results, adhere to the following printing recommendations: maintain a printing temperature of 170-180 ºC, with a bed temperature ranging from 50-60 ºC. A printing speed of 5-20 mm/s and a layer height exceeding 0.15 mm are advised. To safeguard the integrity of the filament, store it in a dry, shaded environment within the temperature range of 5-30 ºC. Prior to printing, it is advisable to pre-dry the filament at 60 ºC for 2 minutes, mitigating the risk of filament irregularities such as popping or nozzle clogging. As far as the nozzle, it is recommended to use a nozzle with a diameter of at lest 0.8 mm due to the abrasiveness of the graphene particles. More 3D printing tips can be found in the technical datasheet and printing recommendations document in the Downloads section.

General information
Material	PLA
Format	10 m
Density	1.38 g/cm³
Filament diameter	1.75 mm
Filament tolerance	±0.15 mm
Filament length	10 m

Printing properties
Printing temperature	170-180 ºC
Print bed temperature	50-60 ºC
Chamber temperature	-
Cooling fan	-
Recommended printing speed	5-20 mm/s

Mechanical properties
Elongation at break	- %
Tensile strength	- MPa
Tensile modulus	- MPa
Flexural strength	- MPa
Flexural modulus	- MPa
Surface hardness	-

Thermal properties
Melting temperature	152 ºC
Softening temperature	- ºC

Specific properties
Transparency	✗

Other
HS Code	3916.9
Spool diameter (outer)	- mm
Spool diameter (inner hole)	- mm
Spool width	- mm

General Information
Manufacturer	Colfeed4Print
Material	PLA with graphene particles
Format	10 m spool
Density	1.38 g/cm³
Filament Diameter	1.75 mm
Diameter Tolerance	±0.15 mm
Filament Length	10 m
Color	-
RAL/Pantone	-
Printing Properties
Printing Temperature	170-180 ºC
Bed Temperature	50-60 ºC
Chamber Temperature	-
Layer Fan	-
Printing Speed	5-20 mm/s
Nozzle Diameter	≥ 0.8 mm
Mechanical Properties
Izod Impact Strength	-
Charpy Impact Strength	-
Elongation at Break	-
Tensile Strength	-
Tensile Modulus	-
Flexural Strength	-
Flexural Modulus	-
Surface Hardness	-
Thermal Properties
Softening Temperature	-
Melting Temperature	152 ºC
Specific Properties
Transparency	✗
Additional Information
HS Code	3916.9
Reel Diameter (Outer)	-
Reel Diameter (Inner Hole)	-
Reel Width	-

* The typical values detailed in this table should be considered as reference only. Actual values may vary depending on the 3D printer model used, part design, and printing conditions. We advise confirming results and final properties with your own tests. For more information, consult the product's technical datasheet.