

In the world of FDM/FFF 3D printing, there is a family of materials that has stood out clearly above all others for some years now, the PAEK family (polyaryletherketone or polyaryletherketone ether ketone). The materials belonging to this class are semi-crystalline plastics, which withstand high temperatures (around 200 ºC) while maintaining high mechanical strength values.
The PAEK family includes PEEK, PEKK and PEI. All of them have high mechanical strength, chemical resistance and high temperature flammability.
PEEK (polyetheretheretherketone) is one of the world's highest performing polymers. PEEK has exceptional mechanical, thermal and chemical resistance properties, making it an ideal material for some of the most demanding applications such as seals, gears, bushings, bearings, pump and compressor components. Industries such as automotive, aerospace, defence, defence, semiconductor and oil/gas depend on PEEK for applications where failure is not an option.
CarbonX™ PEEK CF10 filament is a filament composed of PEEK and reinforced with carbon fibre, which gives the material exceptional stiffness, strength and dimensional stability.
Some of the most important properties of CarbonX™ PEEK CF10 filament are the following:
This filament is an advanced material that requires the use of a industrial 3D printer that reaches printing temperatures of 380-410°C and a chamber temperature of up to 140°C. Due to its difficulty in printing, this filament is recommended for expert users.
General information |
|
Material | PEEK/PEKK |
Format | 500 g |
Density | (ISO 1183) 1.39 g/cm³ |
Filament diameter | 1.75 mm |
Filament tolerance | ± 0.05 mm |
Filament length | ± 150 m |
Electrical properties |
|
Surface electrical resistivity | (ASTM D257) 10⁹ Ohm/sq |
Printing properties |
|
Printing temperature | 400 ºC |
Print bed temperature | 130 - 140 ºC |
Chamber temperature | 140 ºC |
Cooling fan | ✗ |
Recommended printing speed | 10 - 50 mm/s |
Mechanical properties |
|
Elongation at break | (ISO 527) 3 % |
Tensile strength | (ISO 527) 105 MPa |
Tensile modulus | (ISO 527) 8100 MPa |
Flexural strength | (ISO 178) 136 MPa |
Flexural modulus | (ISO 178) 8300 MPa |
Surface hardness | - |
Thermal properties |
|
Melting temperature | 343 ºC |
Softening temperature | 264 ºC |
Specific properties |
|
Transparency | - |
Chemical resistance | ✓ |
Other |
|
HS Code | 3916.9 |
Spool diameter (outer) | 200 mm |
Spool diameter (inner hole) | 52 mm |
Spool width | 55 mm |
The use of PEEK CF requires extensive experience in the 3D printing industry and a qualified 3D printer, as it requires an extrusion temperature of 380-410°C, a base temperature of 130-150°C and a chamber temperature of up to 140°C, therefore it is recommended to use industrial 3D printers that meet all requirements.
To ensure good adhesion to the substrate and to avoid warping, the use of Nano Polymer Adhesive is recommended.
In the case of PEEK CF filament, it is recommended to use a nozzle with at least 0.5 mm output diameter to avoid clogging. In addition, it is highly recommended that the nozzle be made of hardened steel, as carbon fibre can be very abrasive.