• $options.id_post:
  • $options.slug:
  • https://filament2print.com/gb/blog/_.html
  • es
  • gb
  • pt
  • fr
  • Tribo Filament

    New product

    16 Items

    46,95 €tax excl.
    56,81 €tax incl.

    Ask for information

    It is resistant to friction that offers a response to wear material.

    Tribo filament is a material resistant to friction up to 50 times more than conventional materials used for elements such as ABS in 3D printers as it offers a response to wear. Tribo filament is designed specifically for Tribology. Tribology is the science of friction, wear and lubrication taking place during contact between solid surfaces in motion. The characteristics of a good material as the filament Tribo are to reduce friction and wear to conserve and reduce energy, achieve faster and more precise movements, increase productivity and reduce maintenance. Tribology focuses on the study of three phenomena:

    1. Friction between two bodies in motion; Understood by friction resistance during sliding movement or rolling undergoing a solid to move over another with which it is in contact body.
    2. Wear as a natural effect of this phenomenon; Burnout is a process in which the surface layers of a solid break or detach from the surface. Wear may occur by fatigue, abrasion, erosion, corrosion, by rubbing, sliding, by impact, etc.
    3. Lubrication as a means to reduce wear; Lubrication involves the introduction of an intermediate layer of a foreign material between the moving surfaces.

    The design of parts or manufacturing prototypes are not detached from life assurance with Tribo filament. Tribo filament replaces the ABS to print bearings and gears 3D printers as it is designed to reduce friction, increase the wear resistance of parts and avoid lubrication.

    Filamento autolubricante tribo igus pf-180

    Fuente: www.igus.eu

    Tribo_Data Sheet_EN

    Data sheet in English iglidur I180-PF

    Tribo filament can be printed on most 3D FFF / FDM printers. The bed should be heated to 90-110 °C temperature and the extrusion temperature is 250-260ºC. It is advisable to use Kapton Tape o 3DLac so that the pieces do not tend to detach from the base (warping effect). As for the interior temperature which is printed it is recommended to be controlled and there are no drafts.

    Finally it is important that the 3D printer is in a well-ventilated room. The material should not be heated above 300 °C and which can form hazardous decomposition products.

    • Plastic Type: iglidur® | 180PF
    • Manufacturer: In Europe by igus®
    • Color: White
    • Diameter: 1.75mm or 3mm
    • Nozzle temperature: 250 to 260 ° C
    • Bed temperature based printing: 90-110
    • Quantity: 250 gr coil of very high quality
    • Fan layer: No
    • Print speed: ~ 50 mm / s
    • Print speed of the first layer: ~ 20 mm / s
    • Thickness: 0.1 to 0.3 mm
    • Maximum absorption of moisture has 23ºC and 50%: 0.3% Percentage of weight
    • Maximum water absorption: 0.9% Percentage of weight
    • Maximum temperature of long-term application: + 80ºC
    • Maximum application temperature short-term: + 90 ºC
    • Minimum temperature rating: -40 ºC
    • Spool diameter: 200mm
    • Spool Width: 55mm
    • Inside hole diameter: 50 mm
    • Shipping Weight: 0.5Kg
    • HS Code: 3916.9

    1 other products in the same category: