Taulman Guidel!ne (PETG)

Taulman3D

New product

5 Items

56,95 €
56,95 €

Ask for information

PETG ideal for printing small details, aimed at medical applications and clinical (complies ISO 10993).

Guidel!ne filament is a high strength PETG (Advanced Polyethylene) material with excellent high temperature printing capabilities. It is an ideal material for printing small, fine details without distortion in the parts as it is much less susceptible to thermal accumulation during printing than other materials. (For example, small hollow tubes can be printed without being deformed by accumulation of heat)

Guidel!ne 3D printing filament is ideal also for those users who want to obtain the eventual FDA/CE certification for a device knowing that the raw material has passed the tests by the FDA. (The raw material is suitable and the filament itself is extruded and cooled without contaminants. In the cooling process, contaminants and bacterium are usually embedded in standard filaments). In addition the pH and ORP levels are controlled and adjusted to maintain acceptable levels. All this doesn´t mean that a part printed with 3D Guideline filament is certified. The certification process for medical equipment and components is another part of the totally differentiated certification.

Each coil of 450g of Taulman Guide!ne filament of 1.75mm or 2.85mm is labeled with a QR code that provides traceability and lot of it.

In addition, the Taulman Guide!ne filament is ideally suited to be used as a support material for FDA Nylon 680 FDA (or other nylon), both for the proximity of printing temperatures and FDA approved.

In addition, you can register the Guidel!ne spool by sending an email to accounts [at] taulman3d.com with the serial number and Taulman3D will also provide all the information necessary to obtain COA (Certificate of Authenticity) certification and thus facilitate The processing of the FDA certification of the final piece.

The Guidel!ne filament has a tensile strength superior to Tech-G itself, reaching 6850 PSI. Its elongation is 5.9 and a modulus of 281,469 PSI. In addition, the Guidel! Ne filament softens at a temperature of 100 ° C and its heat distortion temperature is 70 ° C.

In addition, the Guidel! Ne 3D printing filament is very easy to print at 250 ° C with a small amount of retraction.

This filament has the following certifications of the US referring to the raw materials:

  • ISO 11607-1: 2006
  • ISO 10993
  • USP Class VI
  • USP 661
  • No.16525 DMF (Drug Master File)
  • FDA


The Guidel!ne 3D printing filament, in addition to its numerous certifications, stands out for its excellent dimensional stability, its non-delamination, its resistance to high temperatures and its compatibility as a support material with nylon filaments.

Elongation at break (%) 5.9
Tensile strength (MPa) 47
Tensile modulus (MPa) 1938
Flexural strength (MPa) 47
Flexural modulus (MPa) 1938
Softening temperature (ºC) 77
Fatigue resistance Fatigue resistance
Translucent Translucent
Alimentary use Alimentary use
Medical use Medical use
Hide color variations (Hide color variations)

Although the ideal temperature may vary in each 3D printer, the average is 250 °C (Between 244 °C and 252 °C). Printing at too high a temperature may cause bubbles in the print and if printed at low temperature may have a completely opaque finish.

It is advisable to use the lower fans. Due to this it is important to adjust the ideal temperature depending on each extruder used. The filament is suitable for any type of nozzle. As for the speed of printing it is advisable to print the same as the ABS (about 40 mm / s) although it can be printed slower for impressions with better finish.

Retraction for a nozzle (nozzle) of 0.5mm is 2.5mm; So following this rule can be applied to any nozzle relationship. In addition, the ideal bed temperature ranges from 45 to 68 ° C at most.

General information
Manufacturer Taulman (USA)
Material PETT (Advanced polyethylene - PETG)
Format Pack of 50 g
Spool of 0.45 kg (1 lb)
Density 1.27 g/cm3
Diameter of filament 1.75 or 2.85 mm
Diameter tolerance ±0,05 mm
Filament length ±147 m (Ø 1.75 mm-0.45Kg)
±56 m (Ø 2.85 mm-0.45Kg)
Color Natural / Clear
RAL/Pantone -
Print settings
Printing temperature 250ºC (244-252ºC)
Print bed temperature 45-68ºC
Chamber temperature Not necessary
Cooling fan Recommended
Recommended printing speed 40 mm/s
Mechanical properties
Izod impact strength -
Charpy impact strength -
Elongation at break 5.9%
Tensile strength 47 MPa
Tensile Modulus 1938 MPa
Flexural strength  -
Flexural modulus -
Surface hardness  -
Thermal properties
Softening temperature 77ºC
Melting temperature 220 ºC
Specific properties
Transparency  Very high (91%)
FDA certification Yes
Inflammability (UL 94 HB) No
Additional Information
HS Code 3916.9
Diameter coil (outer) 200 mm 
Diameter coil (inner hole) 50 mm 
Coil Width 50 mm 


* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.

30 other products in the same category: