Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesWarning: Last items in stock!
Availability date:
Raise3D is one of the leading manufacturers of FDM 3D printers and accessories today. Since its inception, Raise3D has been committed to offering high quality 3D printers with innovative components and operating systems, while maintaining a price point that is suitable for most professional users. In addition to printing equipment, Raise3D develops optimised technical materials for its equipment, as well as support materials so that users can manufacture complex, high quality parts.
Raise3D PPA support filament is a support material specially developed for use in combination with Raise3D PPA (polyphthalamide) based filaments, such as PPA CF. This type of filament has been developed specifically for optimal results with the E2CF 3D printer, but is also compatible with other FDM 3D printers.
Raise3D's PPA support filament creates a stable support structure during the 3D printing process that is able to provide adequate adhesion to both the printing surface and the build material, counteracting the tendency to warp. This results in significant improvements in the surface quality of the overhangs and cavities of printed objects.
The PPA support filament is virtually odourless and is insoluble in water. To remove the support areas after the printing process is complete, the user can easily separate the supports from the workpieces by hand, with virtually no additional tools required.
PPA Support is less expensive than other soluble support materials and is compatible with both PPA CF and PPA GF filament, making it an ideal choice for 3D printing complex parts on Raise3D equipment.
Hide color variations | (Hide color variations) |
After printing with PPA-based filaments, it is recommended to anneal the model to improve the mechanical properties and dimensional accuracy of the part. When using Raise3D PPA support material, it is not necessary to remove the supports to anneal the parts.
Raise3D's PPA support filament has a high compatibility with PPA filaments, including those reinforced with carbon or glass fibre. As for other PA and CF filaments, compatibility depends on the geometry of the 3D printed part.
General information | |
---|---|
Manufacturer | Raise 3D |
Material | PPA Support |
Format | Spool of 1 kg |
Density | 1.26 g/cm3 |
Diameter of filament | 1.75 |
Diameter tolerance | - |
Filament length | ± 330 m |
Color | Purple |
RAL/Pantone | - |
Print settings | |
Printing temperature | - |
Print bed temperature | 60-80 ºC |
Chamber temperature | Not necessary |
Cooling fan | Not recommended |
Recommended printing speed | 30-90 mm/s |
Layer height | 0.1-0.25 mm (0.4 mm nozzle) |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | - |
Tensile strength | - |
Tensile Modulus | - |
Flexural strength | - |
Flexural modulus | - |
Surface hardness | - |
Thermal properties | |
Softening temperature | 218 ºC |
Melting temperature | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
200,00 €
100,00 €
67,95 €
70,00 €
25,90 €
39,55 €
181,80 €
17,35 €
187,00 €
105,00 €
109,99 €
25,95 €
149,99 €
108,95 €
33,80 €
37,95 €
46,95 €
175,00 €
62,92 €
69,95 €
111,32 €
135,52 €
159,72 €
75,02 €
56,00 €
69,99 €