Product successfully added to your cart
0 products in the cart 1 product in the cart
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
More information Gestionar cookiesABS Kevlar is a filament reinforced with aramid fibres, synthetic fibres that are distinguished by their high temperature resistance and high mechanical performance.
ABS alone is distinguished by superior mechanical and thermal properties compared to conventional plastics and is resistant to high temperatures and chemicals.
In this case, the ABS filament is reinforced with aramid fibres, giving rise to ABS Kevlar, technically polyparaphenylene terephthalamide, a synthetic aramid fibre with thermal resistance. It is also a material with high tensile strength and impact resistance, and is, in fact, the material used in bulletproof vests, ballistic helmets or protective clothing.
The aramid fibres in ABS Kevlar ensure dimensional stability, prevent the printed object from warping and even make the object lighter than normal ABS. It is also an abrasive material so it is recommended to always use it with a hardened steel nozzle.
This filament, from the Dutch manufacturer 3D4Makers, is suitable for industrial or professional use as well as for home use, but it is recommended to print it in a ventilated room, away from sources of ignition and to keep it free of humidity.
Elongation at break (%) | 2 |
Tensile strength (MPa) | 31 |
Tensile modulus (MPa) | 1775 |
Flexural modulus (MPa) | 1509 |
Surface hardness | 7 |
Flexibility | Flexibility |
Abrasion resistance | Abrasion resistance |
Lightweight | Lightweight |
Fiber reinforced | Fiber reinforced |
Chemical resistance | Chemical resistance |
3D printing with ABS filament is a little more complex than with PLA filament. In the case of ABS Kevlar filament, it is necessary that the printing base is hot, between 90 and 110ºC. To ensure the dimensional stability of the parts, it is advisable to use a closed 3D printer.
General information | |
---|---|
Manufacturer | 3D4Makers |
Material | ABS with synthetic aramid fiber |
Format | Spool of 500 g |
Density | 1.03 g/cm3 |
Diameter of filament | 1.75 mm or 2.85 mm |
Diameter tolerance | ±0.05 mm |
Filament length | - |
Color | Black |
RAL/Pantone | - |
Print settings | |
Printing temperature | 250-270ºC |
Print bed temperature | 100 ºC |
Closed Chamber | ✓ |
Cooling fan | - |
Recommended printing speed | 50 mm/s |
Mechanical properties | |
Izod impact strength | - |
Charpy impact strength | - |
Elongation at break | 2.3 % |
Tensile strength | 31 MPa |
Tensile Modulus | 1775 MPa |
Flexural strength | - |
Flexural modulus | 1509 MPa |
Surface hardness | Shore 65 D |
Thermal properties | |
Softening temperature | 100 ºC |
Melting temperature | - |
Specific properties | |
Transparency | - |
Inflammability (UL94) | - |
Additional Information | |
HS Code | 3916.9 |
Diameter coil (outer) | - |
Diameter coil (inner hole) | - |
Coil Width | - |
* The typical values detailed in this table should be considered as a reference. Actual values may vary depending on the 3D printer model used, part design and printing conditions. We recommend confirming the results and final properties with own tests. For more information you should consult the technical data sheet of the product.
49,50 €
46,50 €
46,50 €
95,00 €
41,45 €
49,95 €
33,45 €
29,99 €
32,23 €
35,00 €
32,00 €
38,25 €
38,25 €
44,00 €
35,00 €
44,00 €
24,75 €
68,00 €
40,00 €
24,45 €
48,15 €
24,75 €
50,95 €
21,95 €
40,00 €
41,58 €
14,50 €