> >>Einsy RAMBo motherboard for MK3S/MK3S+
Einsy RAMBo motherboard for MK3S/MK3S+ View larger

Einsy RAMBo motherboard for MK3S/MK3S+

PRUSA-EINSY-RAMBO-MB

Prusa3D

New product

1 Item

108,19 €
108,19 €

Ask for information

Einsy RAMBo motherboard with MK3S/MK3S+ firmware preinstalled.

Add to wishlist

The Einsy RAMBo motherboard comes with the firmware preinstalled for the Prusa MK3S and MK3S+ 3D printers. It is a 24V motherboard with a TMC2130 motor driver (1/256 microstepping), an Atmega 2560 main MCU, and an Atmega 32u4 USB-to-serial chip.

The Einsy RAMBo plate includes a plug aligner plastic part, two 5 A ATO blade fuses (rated for 32 V DC), and one 15 A ATO blade fuse (rated for 32 V DC).

Mounting

Image 1: First step on the assembly. Source: Prusa

Before the Einsy RAMBo motherboard is mounted onto the frame, the X-axis motor cable should be plugged into the motherboard like shown in step 1. Next, the textile sleeve should be gently pushed into the slot (orange arrow), leaving the cable slightly loose along the board (the cable should not be strained). The last step is to mount the Einsy base onto the Z-axis frame (marked in purple).

Mounting 2

Image 2: Second step on the assembly. Source: Prusa

It should be kept in mind that the anti-static bag containing the Einsy RAMBo motherboard will be opened when the product is delivered. This is no reason for worry as it is due to the fact that each motherboard is tested before shipping.

More detailed instructions on how to mound the Einsy RAMBo motherboard can be found on the Prusa website (step 13).

Manufacturer Prusa
Type Einsy RAMBo motherboard
HS Code 8477.9

30 other products in the same category:

Filament2Print © All rights reserved

DATIVIC S.L. CIF/VAT: ESB70460423

Pol. Ind. Porto do Molle. 7A. 36350 Nigran (Pontevedra - Spain)