No products

To be determined Shipping

0,00 € Tax

0,00 € Total

Check out

Product successfully added to your cart

0 products in the cart 1 product in the cart

Quantity:

Checkout

Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

More information Gestionar cookies

I accept

View larger

PETG Transparent pellets

Reference:

Brand: Fillamentum

This product could be delivered in a longer time than the standard.

Condition: New product

Format

Colour

Quantity

11,46 €

Ask for information

PETG pellets with high transparency, flexural resistance and high strength and hardness.

Add to wishlist

More info
Data sheet
Download
Usage tips
Specifications

The PETG pellets by Fillamentum are a high quality and easy to process FGF 3D printing material characterized by high transparency and gloss, reduced warping and shrinkage, high flexural strength, and elevated overall resilience and hardness. The PETG pellets are resistant to temperatures of up to 70 ºC and demonstrate good chemical resistance to water, acids, bases and alcohols.

Furthermore, the Fillamentum PETG pellets are RoHS compliant as well as free of styrene and BPA (toxic to people when in contact with food). They have passed all official certifications and have been approved as a valid material for direct food contact both in the EU as well as in the US.

These pellets were created specially for BAAM (Big Area Additive Manufacturing) and MAAM (Middle Area Additive Manufacturing) in mind. They can be extruded with the help of FGF manufacturing solutions such as the CEAD AM Flexbot, the CEAD E25 extruder, the Mahor V4 pellet extruder, or the Dyze Pulsar extruder.

Elongation at break (%)	120
Tensile strength (MPa)	50
Tensile modulus (MPa)	1900
Flexural strength (MPa)	71
Flexural modulus (MPa)	2150
Surface hardness	8
Softening temperature (ºC)	75
Translucent	Translucent
Biodegradable	Biodegradable
Alimentary use	Alimentary use
Hide color variations	(Hide color variations)

PETG pellet Datasheet

Download

PETG pellet Safety Datasheet

Download

The proper storage of 3D printing materials is key to smooth extrusion, and great surface quality and mechanical properties of the 3D printed part. The PETG pellets should be stored in a closed package in dry conditions at temperature below 50 ºC, protected from UV-light at all times. If the pellets absorb excess moisture, they should be dried for 5 hours at 65 ºC. The recommended processing temperature for the PETG pellets is 235 - 255 ºC.

General Information
Material	PETG
Format	1 kg 5 kg 15 kg
Density	1.27 g/cm³
Color	Clear
Mechanical Properties
Izod Impact Strength	-
Charpy Impact Strength (ISO 179)	237 kJ/m²
Ultimate Tensile Strength (ISO 527)	26 MPa
Maximum Strain at Break (ISO 527)	120 %
Tensile Strength (ISO 527)	50 MPa
Tensile Modulus (ISO 527)	1900 MPa
Flexural Strength (ISO 178)	71 MPa
Flexural Modulus (ISO 178)	2150 MPa
Surface Hardness (ISO 7619)	Shore 75 D
Thermal Properties
Processing Temperature (ISO 306)	235 - 255 ºC
Glass Transition Temperature	-
Melting Temperature	-
MFR Ratio	-
Electrical Properties
Volumetric Electrical Resistivity	10¹⁶ Ohm/cm
Additional Information
HS Code	3901.1

* The typical values detailed in this table should be considered as reference. We advise confirming the results and final properties with your own tests. For more information, consult the product's technical datasheet.